| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP9946 — Compaq Remote Monitor Service does not support I960 Bridged Adapters for Hot Plug Operations.
| SoftPaq Number |
SP9946 |
| Filename |
sp9946.exe |
| Size |
128K |
| Date |
March 22, 1999 |
| Version |
2.05.96 |
| Operating System |
Microsoft Windows NT, version 4.0 |
| Products Affected |
Compaq ProLiant 6500 (all models) and 7000 (all models) |
Readme
SOFTPAQ NUMBER: SP9946
PART NUMBER: N/A
FILE NAME: CPQRCMC.EXE & CQRSCSMN.DLL
TITLE: Compaq Remote Monitor Service does not support I960 Bridged
Adapters for Hot Plug Operations.
VERSION: 2.05.96
LANGUAGE: English
CATEGORY: Drivers
DIVISION: Systems
PRODUCTS AFFECTED: Compaq ProLiant 6500 (all models) and 7000 (all models)
OPERATING SYSTEM: Microsoft Windows NT, version 4.0
SYSTEM CONFIGURATION: Compaq ProLiant 6500 and 7000 with the
Compaq Remote Monitor Service installed from
the Compaq Support Software for Microsoft
Windows NT 4.0.
EFFECTIVE DATE: March 22, 1999
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 2.x
SUPERSEDES:
DESCRIPTION: This SoftPaq creates version 2.05.96 of the Compaq Remote
Monitor Service for Microsoft Windows NT 4.0. This version of the
service allows the recognition of devices on adapter boards that
incorporates the I960 bridge. Once the device is found and it is
determined that the supporting adapter driver is hot plug capable, hot
plug operations will then be permitted.
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive and change
to that directory. The file that is downloaded (SP9946.EXE) is a
self-extracting executable file.
2. From that drive and directory, execute the SoftPaq file and follow
the on-screen instructions to unpack the files:
SP9946 [ENTER]
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for the
files, or default to the download directory. The following files will
be created:
CPQRCMC.EXE
CQRSCSMN.DLL
SETUP.CMD
README.TXT
3. After the files have been created, you may delete the
self-extracting file downloaded in step 1.
4. For installation instructions, refer to README.TXT.
Copyright 1999, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|