SOFTPAQ NUMBER:  SP9921
PART NUMBER:  127564-001
FILE NAME:  N/A
TITLE:  Presario 7100 Specific Model System ROM Update
VERSION:  11/09/95 R1.40 Rev A
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Consumer

PRODUCTS AFFECTED:  Compaq Presario 7150, 7152, 7170, 7180

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  March 30, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.01

SUPERSEDES:  N/A

DESCRIPTION:  This SoftPaq creates a bootable Compaq Presario System ROM
Update Diskette, which can be used to update the System ROM for the
Presario models 7150, 7152, 7170, and 7180 to version 11/09/95 R1.40 Rev A.

This version contains enhancements to improve system performance.

HOW TO USE:

1.  Format a 1.44-MB diskette.

2.  Download the SoftPaq to a temporary, empty directory on your
    hard drive and change to that directory.  The file downloaded
    is a self-extracting executable with a filename based on the
    SoftPaq Number above.

3.  From that drive and directory, execute the SoftPaq file.
    You will be prompted to place the formatted 1.44 MB diskette
    into a diskette drive to create the ROMPaq diskette.

4.  After the files are created, you may delete the downloaded
    file if you wish.

5.  Place the ROMPaq diskette into drive A: of the computer you
    wish to update and turn on the power or reboot the computer,
    allowing it to boot from the diskette.

6.  Follow the instructions on the screen to continue.

7.  Select the ROM version to be installed.

8.  The ROMPaq diskette will automatically update the System ROM and 
    notify you when the update is finished.

    DO NOT TURN OFF YOUR COMPUTER'S POWER DURING THIS PROCESS

9.  When the ROM update is finished, you will need to turn the computer off
    and back on for the changes to be in effect.  Remove the ROMPaq diskette
    from the computer.  Turn the computer's power switch OFF, wait 15
    seconds, then turn the switch ON again.

IMPORTANT: When the power switch on the back of the unit is switched off,
           the power protection features of the power supply require that
           the switch be in the off position for up to 15 seconds before 
           being switched back on.  Otherwise, the power supply might not
           turn on.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.