SOFTPAQ NUMBER:  SP9909
PART NUMBER:  386298-006, 386299-006
FILE NAME:  N/A
TITLE:  Workstation Millennium II/G200/G100 MMS Drivers for Windows NT 4.0
VERSION:  4.06 Rev A
VENDOR VERSION NUMBER: 4.06.023
LANGUAGE:  English, French, Italian, German

CATEGORY:  Drivers

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstation 5100, 6000, 8000, AP200, 
	  	    AP400, AP500, or SP700 using the Millennium II Graphics 
		    Controller;		    
		    Compaq Professional Workstation AP200, AP400, AP500, or
		    SP700 using the G200 PCI or G200 AGP Graphics Controller;
		    Compaq Professional Workstation AP400, AP500, or SP700 
		    using the Productiva G100 MMS Graphics Controller
		    
	    NOTE:   These graphics controllers are standard equipment on selected 
		    Workstation models only, but could be an option installed
		    on other models.

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  Millennium II Graphics Controller (PCI), 
                       Millennium G200 Graphics Controller (PCI or AGP), 
		       or Productiva G100 MMS Graphics Controllers

EFFECTIVE DATE:  March 17, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP9627

DESCRIPTION:  Creates the two-diskette set, "Workstation Millennium 
II/G200/G100 MMS Drivers for Windows NT 4.0."

Enhancements/Fixes:

Display driver:
- The line drawing code has been modified for better performance (errorinit bit 
  support) with G200 boards.
- The memory sizes for DirectDraw are reported in bytes instead of pixels.
- Right clipping has been added in the multi-board text code for flat panel.
- A fix for the PixelVision code has been made.
- The overlay is now supported for flat panel.
- The clipper limit for AutoCAD has been removed in bCreateSurfaceRGB.
- The 2D bus mastering code has been reorganized.
- Bus mastering transfers now use RPL whenever possible.

Miniport driver: 
- The miniport driver is now VGA-compatible.
- BIOS tables have been added for FlatPanel.
- For Productiva G100 MMS, the minimum amount of memory is read from the PINS.
- The PINS checksum for Quad G100 slave chips is modified to take into account 
  the modification to the serial number, and bValidateBiosPin verifies the 
  checksum.

HOW TO USE:

1.  Obtain 2 formatted 1.44-MB diskettes.

2.  Download the SoftPaq to a directory on your hard drive and change to that 
directory.  The file that is downloaded is an executable with a filename based 
on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file and follow the 
on-screen instructions.  You will be prompted to insert the formatted diskettes 
in a drive to create the diskettes.

4.  After the diskettes have been created, you may delete the SoftPaq file 
downloaded in step 2.

5.  To Install, see A:\READMENT.TXT on the first diskette.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks 
of their respective companies