SOFTPAQ NUMBER:  SP9904
PART NUMBER:  N/A
FILE NAME:    N/A
TITLE:  Professional Workstation SP700 Flash Recovery ROMPaq
VERSION:  686W6_030599 Rev A
LANGUAGE:  English

CATEGORY:  Workstations/ROMPaqs

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstation SP700
		
OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  March 17, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP9239

DESCRIPTION:  Creates the Flash Recovery ROMPaq Firmware Diskette for the 
Compaq Professional Workstation SP700.  The flash recovery diskette 
is used when the System ROM is corrupt and a normal ROMPaq diskette will 
not work because no video is available.  The flash recovery ROMPaq 
overcomes this situation by using a combination of system beeps and 
system LEDs to communicate with the user.  The diskette contains an image 
of the 03-05-99 SP700 System ROM. 

Enhancements/Fixes:
	
- 3.5 Silicon AGP Performance Enhancements	
- Enable / Disable Processor ID in Pentium III processors via F10 Setup

HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskette in a drive to create the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5. Detailed instructions on how to use the flash recovery diskette are 
in a README.TXT file located on the flash diskette.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.