SOFTPAQ NUMBER:  SP9903
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Professional Workstation SP700 ROMPaq Upgrade 
VERSION:  686W6_030599 Rev A
LANGUAGE:  English

CATEGORY:  Workstations/ROMPaqs

DIVISIONS:  Workstations

PRODUCTS AFFECTED: Compaq Professional Workstation SP700
		    	
OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  March 17, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP9238

DESCRIPTION:  Creates the ROMPaq Firmware Upgrade Diskette for the 
Compaq Professional Workstation SP700, which allows a user to 
upgrade the System ROM to the 03/05/99 version.

Enhancements/Fixes:
	
- 3.5 Silicon AGP Performance Enhancements	
- Enable / Disable Processor ID in Pentium III processors via F10 Setup

HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskette in a drive to create the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5. Keeping the newly created diskette in the A: drive, cycle 
system power to boot from the ROMPaq diskette.

6. Follow the on-screen instructions to upgrade the System ROM.

WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING 
THE UPGRADE PROCESS!!!!

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.