SOFTPAQ NUMBER:  SP9898
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Server Support for Microsoft Windows NT 3.51
        (Files rather than diskettes)
VERSION:  1.35 Rev A
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS: Systems

PRODUCTS AFFECTED:  ProLiant 800, ProLiant 850R, ProLiant 1000,
ProLiant 1200, ProLiant 1200R, ProLiant 1500, ProLiant 1500R,
ProLiant 1600, ProLiant 1850R, ProLiant 2000, ProLiant 2500,
ProLiant 2500R,ProLiant 3000, ProLiant 3000R, ProLiant 4000,
ProLiant 4500, ProLiant 4500R, ProLiant 5000, ProLiant 5000R,
ProLiant 5500, ProLiant 6000, ProLiant 6400R, ProLiant 6500,
ProLiant 7000, ProSignia 300, ProSignia 500, Prosignia 740,
Systempro, Systempro/e, Systempro/LT, Systempro/XL

OPERATING SYSTEM:  Microsoft Windows NT 3.51

SYSTEM CONFIGURATION:  N/A

PREREQUISITES: N/A

EFFECTIVE DATE:  July 22, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP8707

DESCRIPTION:  This SoftPaq creates two files -- a description file 
and a large self-extracting executable file.  The self-extracting 
executable file contains Compaq Server Support for Microsoft
Windows NT 3.51 that supports the following subsystems and
features of Compaq Servers:

   ATI Rage IIC Graphics Controller
   Compaq Advanced Network Control Utility
   Compaq Ethernet, Fast Ethernet, or Gigabit Controllers
        Compaq NC1120 Ethernet NIC		
	Compaq NC3120 Fast Ethernet NIC 		
	Compaq NC3121 Fast Ethernet NIC 		
	Compaq NC3122 Fast Ethernet NIC 		
	Compaq NC3123 Fast Ethernet NIC 		
	Compaq NC3131 Fast Ethernet NIC		
	Compaq NC3132 Fast Ethernet Module		
	Compaq NC3133 Fast Ethernet Module		
	Compaq NC3160 Fast Ethernet NIC		
	Compaq NC3161 Fast Ethernet NIC		
	Compaq NC6132 Gigabit Module		
	Compaq NC6133 Gigabit Module		
	Compaq NC6134 Gigabit NIC		
   Compaq HAL Support (Uniprocessor and Multiprocessor)
   Compaq Integrated Management Display Utility
   Compaq Netelligent Controllers
   	Compaq Netelligent 10 T/2 PCI UTP/Coax Controller
    	Compaq Netelligent 10 T PCI UTP Controller
    	Compaq Netelligent 10/100 TX PCI UTP Controller
    	Compaq Netelligent Dual 10/100 TX PCI UTP Controller	
   Compaq NetFlex-3 Controllers
    	Compaq NetFlex-3/P Controller	
    	Compaq NetFlex-3/E Controller	
   Compaq Network Teaming and Configuration Utility
   Compaq ProLiant Storage System 
   Compaq Recovery Server, Standby Agent with SMART-2 Support
   Compaq Recovery Server, Online Agent with SMART-2 Support
   Compaq Remote Insight Board/PCI Driver
   Compaq Remote Insight Board/PCI WAN Driver
   Compaq SCSI Controllers
	Compaq Dual Channel Wide-Ultra SCSI-3 Controller	
        Compaq Wide-Ultra SCSI-3 Controller
        Compaq 32-Bit Fast-Wide SCSI-2/E Controller
      	Compaq 32-Bit Fast-SCSI-2 Controller
    	Integrated 32-Bit Fast-SCSI-2/P Controller	
    	Integrated 32-Bit Fast-Wide SCSI-2/P Controller
    	Integrated Wide-Ultra SCSI Controller
    	Compaq 32-Bit Fast-SCSI-2 Controller option board	
    	Compaq 32-Bit Fast-Wide SCSI-2/P Controller option board
	Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board    	
	Compaq Wide-Ultra SCSI-3 Controller option board      
   Compaq SMART/SMART-2 Array Controllers
	Compaq SMART/IDA-2/IDA/IAES Controllers
	Compaq SMART-2/P and Compaq SMART-2/E Controllers
	Compaq SMART-2DH Controller
	Compaq SMART-2SL Controller 
   Compaq Smart Array Controllers
        Compaq Smart Array 3100ES Controller  
        Compaq Smart Array 3200 Controller
   Compaq Server Support Installation Utility
   Compaq System Management/Health Driver

 
Enhancements/Fixes:

The release of the Compaq Server Support for Microsoft 
Windows NT 3.51 Version 1.35 Revision A primarily 
supports the following new products:

?	Compaq NC3123 Fast Ethernet NIC
?	Compaq NC6134 Gigabit NIC
?	ProLiant 6400R 6/550-2 MB Model 2-1024
?	ProLiant 6400R 6/550-1 MB Model 2-256
?	ProLiant 6400R 6/550-512 KB Model 1-256
?	Prosignia Server 740 6/600
?	Compaq 64-Bit Dual Channel Wide-Ultra2 SCSI Controller

Compaq Ethernet, Fast Ethernet, or Gigabit Controller 
Driver(N100.SYS, N1000NT3.SYS) 

?	Updated the Compaq Ethernet or Fast Ethernet Controller 
	Driver, N100.SYS, from Version 3.29.01.0008 to Version 
	3.29.01.0011, which provides new support for the Compaq 
	NC3123 Fast Ethernet NIC.
?	Added new support to Version 1.05.00.1012 of the Compaq 
	Gigabit Controller Driver, N1000NT3.SYS, for the Compaq 
	NC6134 Gigabit NIC.

Compaq SCSI Controller Driver(CPQ32FS2.SYS) 

?	Updated the Compaq SCSI Controller Driver from  Version 
	2.57 to Version 2.58.  
?	Added new support for the Compaq 64-Bit Dual Channel 
	Wide-Ultra2 SCSI Controller.
?	Modified the Compaq SCSI Controller Driver to detect 
	invalid firmware for Quantum DLT 7000 tape drives, 
	which are incapable of running at high speed with firmware 
	versions earlier than 0x2050.  When the incorrect firmware 
	is detected, the driver forces the tape drive to run at 
	the slowest speed, which is asynchronous 8-bit.

Compaq Server Support Setup for Microsoft Windows NT 3.51(SETUP.EXE) 

?	Added new support for the Compaq Ethernet, Fast Ethernet, 
	or Gigabit Controller Drivers so that they may be updated 
	locally.  Refer to Table 4 of the SMS Unattended 
	Installation/Update of the Compaq SSD for Windows NT 
	section for the associated constraints.
?	Fixed a Compaq Ethernet, Fast Ethernet, or Gigabit 
	Controller removal issue involving systems configured 
	with multiple Compaq Ethernet, Fast Ethernet, or Gigabit 
	Controllers.  In this case, using Version 1.34C of the 
	Compaq SSD for Windows NT 3.51 Setup program to remove a 
	Compaq Ethernet, Fast Ethernet, or Gigabit Controller 
	results in the removal of the Network icon from the 
	Control Panel even if other hardware instances were installed. 

Compaq System Management Driver(SYSMGMT.SYS)

?	Updated the Compaq System Management Driver version 
	from 3.18.02 to 3.19.01.  
?	Corrected a problem in the driver that would potentially 
	cause a Windows NT BugCheck if the system encountered a 
	large number of correctable processor errors.  This issue 
	affected all Pentium Pro, Pentium II, Pentium III, 
	Pentium II Xeon, and Pentium III Xeon systems configured 
	with Version 3.06.01 or later of the Compaq System Management 
	Driver.


For details, refer to NTREADME.HLP in the created support files.


HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and
   change to that directory.  The file that is downloaded is a 
   self-extracting executable with a filename based on the 
   SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
   and follow the on-screen instructions to unpack the files.
   The number of files to be created and total file size is 
   displayed.  You will be given the chance to specify the 
   target directory for the files, or default to the download
   directory.  The following files will be created:

   README.TXT
   NTSSD.EXE

3. After the files have been created, you may delete the  
   self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
   self-extracting executable:
      
   NTSSD.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the
   support software files to a folder on your hard drive and run
   the program SETUP.EXE to install the software.


Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.