SOFTPAQ NUMBER:  SP9710
PART NUMBER:  277294-294, 277295-294, 277296-294, 277297-294, 277298-294,
              277299-294
FILE NAME:  NSSD
TITLE:	Japanese Novell Support Software Diskette (NSSD)
VERSION:  5.03 Rev A
LANGUAGE:   Japanese

CATEGORY:  Drivers

DIVISIONS:  Systems

PRODUCTS AFFECTED:  Compaq Server products
z
OPERATING SYSTEM:  Novell NetWare 3.2J, intraNetWare, intraNetWare SMP, 
                   intraNetWare SFT-III, NetWare 5 (Japanese) 

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  March 22, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP9509

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode.  It creates six diskettes.
The NSSD diskettes contain NetWare and intraNetWare drivers, NetWare 
Loadable Modules (NLMs), and support information to optimize the 
performance of NetWare and IntranetWare on Compaq servers.  
This software enhances the performance of Compaq options such as Compaq 
Drive Array controllers, Compaq 32-Bit SCSI-2 controllers, and Compaq 
CD-ROM drives.

Enhancements/Fixes:  

NETWORK DRIVER UPDATES

N100.LAN v4.12 - NSSD 5.03
  *N100.LAN fixes an ABEND issue with NetWare SMP while using multiple NICs.

N1000.LAN v1.04 - NSSD 5.03
  *N1000.LAN v1.04 adds support for the Compaq Fast Ethernet Gigabit
   1000 SX Upgrade Module NC6132.


SERVER MANAGEMENT UPDATES

CPQHLTH.NLM v4.06 - NSSD 5.03
  *CPQHLTH.NLM v4.06 adds support for the Compaq ProLiant 6400R
   server.

   NOTE:  Power Supply Hot Plugging on the Compaq ProLiant 6400R
          server requires a 6 second delay between both removal and
          insertions.  Users should wait 6 seconds after pulling and
          before inserting power supplies.

CPQONLIN.NLM v2.40 - NSSD 5.03
  *CPQONLIN.NLM v2.40 adds support for redundant controllers.
  *CPQONLIN.NLM v2.40 adds support for RAID migration.
  *CPQONLIN.NLM v2.40 adds support for stripe size migration.

CPQSBD.NLM v2.15 - NSSD 5.03
  *CPQSBD.NLM v2.15 corrected a potential problem where an ABEND
   might occur when using the PCI Hot Plug Push Buttons.
  *CPQSBD.NLM v2.15 was enhanced to enable hot add to work in
   situations where low resources are available.


STORAGE UPDATES

CPQSCSI.HAM v1.32 - NSSD 5.03
  *CPQSCSI.HAM v1.32 adds support for the Compaq 64-Bit Dual Channel
   Wide Ultra2 SCSI Adapter.


HOW TO USE

1. Obtain six (6) formatted 1.44 MB diskettes.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskettes in a drive to create the diskettes.

4.  After the diskettes have been created, you may delete the  
SoftPaq file downloaded in step 2.

5. For installation instructions, refer to READ1ST.RDM and WHATSNEW.RDM 
on the created diskettes.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.