| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP9700 — Compaq Server Support for Microsoft Windows NT 4.0 (Network Interface Controller Drivers)
| SoftPaq Number |
SP9700 |
| Filename |
sp9700.exe |
| Size |
1921K |
| Date |
March 22, 1999 |
| Version |
2.12 Rev B |
| Operating System |
Windows NT 4.0 |
| Products Affected |
All Compaq Servers |
| Supersedes |
SP9505 |
Readme
SOFTPAQ NUMBER: SP9700
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Compaq Server Support for Microsoft Windows NT 4.0
(Network Interface Controller Drivers)
VERSION: 2.12 Rev B
LANGUAGE: Japanese
CATEGORY: Drivers
DIVISIONS: Systems
PRODUCTS AFFECTED: All Compaq Servers
OPERATING SYSTEM: Microsoft Windows NT 4.0 (Japanese)
SYSTEM CONFIGURATION: N/A
PREREQUISITES: N/A
EFFECTIVE DATE: March 22, 1999
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 2.x
SUPERSEDES: SP9505
DESCRIPTION: This SoftPaq is for Japanese products, and cannot be run
in United States mode. This SoftPaq creates two files -- a description
file and a self-extracting executable file. The self-extracting
executable file contains Compaq Server Support for Microsoft Windows
NT 4.0 that supports the following subsystems and features of
Compaq Servers:
Compaq Advanced Network Control Utility
Compaq Ethernet or Fast Ethernet Controllers
Compaq NC1120 Ethernet NIC
Compaq NC3120 Fast Ethernet NIC
Compaq NC3122 Fast Ethernet NIC
Compaq NC3160 Fast Ethernet NIC
Compaq NC3161 Fast Ethernet NIC
Compaq Netelligent Family of Controllers
Compaq Netelligent 10 T/2 PCI UTP/Coax Controller
Compaq Netelligent 10 T PCI UTP Controller
Compaq Netelligent 10/100 TX PCI UTP Controller
Compaq Netelligent Dual 10/100 TX PCI UTP Controller
Compaq Netelligent 10/100 TX Embedded UTP/Coax Controller
Compaq Netelligent 10/100 TX Embedded UTP/AUI Controller
Compaq Netelligent 10/100 TX Embedded UTP Controller
Compaq NetFlex-3 Family of Controllers
Compaq NetFlex-3/P Controller
Compaq NetFlex-3/E Controller
Compaq Server Support Installation Utility
Enhancements/Fixes:
The release of the Compaq Server Support for Microsoft Windows
NT 4.0 Version 2.12 Revision B, primarily supports the following
new products:
- Compaq ProLiant 6400R 500/100 512k 256MB
- Compaq ProLiant 6400R 500/100 1MB 256MB
- Compaq ProLiant 6400R 500/100 2MB 1GB
- Compaq 64-Bit Dual Channel Wide-Ultra2 SCSI Controller
Compaq Server Support Setup for Microsoft Windows NT 4.0-(SETUP.EXE)
- Reorganized the diskette contents for the Compaq SSD for Windows NT
to optimize diskette space as follows:
* The following components were moved from diskette 1 to diskette 2:
- Compaq ProLiant Storage System Driver
- Compaq SCSI Controller Driver
- Compaq SCSI Miniport Class DLL
- Compaq SMART/SMART-2 Array Controller Driver
* The following components were moved from diskette 2 to diskette 4:
- Compaq Advanced Network Control Utility
- Compaq Netelligent/NetFlex-3 Controller Driver and DLL
- NIC Miniport Class DLL
* The following components were moved from diskette 2 to diskette 1:
- Compaq Remote Insight Board/PCI Driver
- Compaq Remote Insight Board/PCI WAN Driver
For details, refer to NTREADME.HLP in the created support files.
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive and change
to that directory. The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.
2. From that drive and directory, execute the downloaded file
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for
the files, or default to the download directory.
The following files will be created:
README.TXT
NICS.EXE
3. After the files have been created, you may delete the
self-extracting file downloaded in step 1.
4. From the directory in which the files are created, execute the
self-extracting executable:
NICS.EXE [ENTER]
5. Follow the instructions on the screen to extract (unzip) the support
software files to a folder on your hard drive and run the program
SETUP.EXE to install the software.
Copyright 1999, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|