| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP9627 — Workstation Productiva G100 MMS Drivers for Windows NT 4.0
| SoftPaq Number |
SP9627 |
| Filename |
sp9627.exe |
| Size |
1988K |
| Date |
February 2, 1999 |
| Version |
4.00 Rev A VENDOR VERSION NUMBER: 4.00.009 |
| Operating System |
Windows NT 4.0 |
| Products Affected |
Compaq Professional Workstation AP400, AP500, or SP700 using the Productiva G100 MMS Graphics Controller NOTE: This graphics controller is standard equipment on selected Workstation models only, but could be an option installed on other models. |
Readme
SOFTPAQ NUMBER: SP9627
PART NUMBER: 118143-001, 118144-001
FILE NAME: N/A
TITLE: Workstation Productiva G100 MMS Drivers for Windows NT 4.0
VERSION: 4.00 Rev A
VENDOR VERSION NUMBER: 4.00.009
LANGUAGE: English, French, Italian, German
CATEGORY: Drivers
DIVISIONS: Workstations
PRODUCTS AFFECTED: Compaq Professional Workstation AP400, AP500, or SP700
using the Productiva G100 MMS Graphics Controller
NOTE: This graphics controller is standard equipment on selected
Workstation models only, but could be an option installed on other models.
OPERATING SYSTEM: Microsoft Windows NT 4.0
SYSTEM CONFIGURATION: Productiva G100 MMS Graphics Controller
EFFECTIVE DATE: February 2, 1999
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 2.X
SUPERSEDES: N/A
DESCRIPTION: Creates the two-diskette set, "Workstation Productiva G100 MMS
Drivers for Windows NT 4.0." This driver supports only Matrox G100
Multi-Monitor Solution (MMS) graphics, which can support up to 5 monitors
at the same time on one computer.
This is the same version of this driver that was originally included on the
affected Workstation AP400, AP500 and SP700 models. It is not an update.
It is offered here as a convenience to customers who may need to restore
the driver to their computer for any reason.
HOW TO USE:
1. Obtain 2 formatted 1.44-MB diskettes.
2. Download the SoftPaq to a directory on your hard drive and change to that
directory. The file that is downloaded is an executable with a filename based
on the SoftPaq Number above.
3. From that drive and directory, execute the downloaded file and follow the
on-screen instructions. You will be prompted to insert the formatted diskettes
in a drive to create the diskettes.
4. After the diskettes have been created, you may delete the SoftPaq file
downloaded in step 2.
5. To Install, see READMENT.TXT on the first diskette.
Copyright 1999, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered trademarks
of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|