SOFTPAQ NUMBER:  SP9572
PART NUMBER:  276749-002
FILE NAME:  N/A
TITLE:  Deskpro Diamond Viper V330 Video Driver for Windows NT 4.0
VERSION:  4.00.1381.0234 Rev F
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS:  Desktops

PRODUCTS AFFECTED: Compaq Deskpro EP, Deskpro EN and Deskpro SB models with a 
                   Diamond Viper V330 Graphics Controller including the following
                   models
       Deskpro EN: 6450, 6400, 6350, 6333C, 6333, 6300CA, 6300C, 6300, 6266
       Deskpro EP: 6300A, 6300, 6266C, 6266, 6450, 6400, 6350, 6333C, 6333
       Deskpro SB: 6300, 6266, 6400, 6350, 6333
             NOTE: To determine if your model has this controller --
                   In Windows NT, go to the Control Panel, then select 
                   Display, Settings, Display type.

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  Diamond Viper V330 Graphics Controller

PREREQUISITES:  N/A

EFFECTIVE DATE:  February 8, 1999

SOFTPAQ UTILITY VERSION:  4.0

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES:  SP5767

DESCRIPTION:  Unpacks the files needed to install the Windows NT 4.0 video 
driver for the Diamond Viper V330 Graphics Controller used in certain 
models of the Deskpro EP, Deskpro EN and Deskpro SB Series (see NOTE above).
Optionally allows an installation diskette to be created.  

Enhancements/Fixes: 
  - Adds support for the System Software Manager tool

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into a subdirectory named 
Disk_01 that is created under the download directory or the directory 
specified.  

3. After the folder Disk_01 has been created, you may delete the  
self-extracting file downloaded in step 1.

4. The driver may be installed directly from the files on the download 
directory or driver diskette can be created. 
To create a driver diskette, run MAKEDISK.BAT.

To install the driver, go to the Control Panel and select:

   Display/Settings/Display Type

Verify that the Adapter Type is one of the ones listed above.
If it is not, then cancel and exit.
If it is, then continue to select:
    
   Change/Have Disk

Type in the path to the download directory or select "Browse" to 
specify the location of the files extracted in step 2.

5. Select OK to install the driver.

6. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies