SOFTPAQ NUMBER:  SP9571
PART NUMBER:  276751-002, 276752-002, 276753-002
FILE NAME:  N/A
TITLE:  Deskpro Diamond Viper V330 Video Driver for Windows 95/98 
VERSION:  4.10.01.0028 Rev J
LANGUAGE:  English

CATEGORY:  Driver

DIVISIONS:  Desktops

PRODUCTS AFFECTED: Compaq Deskpro EP, Deskpro EN and Deskpro SB models with a 
                   Diamond Viper V330 Graphics Controller, including the 
                   following models
       Deskpro EN: 6450, 6400, 6350, 6333C, 6333, 6300CA, 6300C, 6300, 6266
       Deskpro EP: 6300A, 6300, 6266C, 6266
       Deskpro SB: 6300, 6266
       Deskpro EP: 6450, 6400, 6350, 6333C, 6333
       Deskpro SB: 6400, 6350, 6333 
             NOTE: To determine if your model has this controller --
                   In Windows 95/98, go to the Control Panel, then select the 
                   System icon, the Device Manager tab, and the Display 
                   adapters icon.

OPERATING SYSTEM:  Microsoft Windows 95
                   Microsoft Windows 98

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  February 8, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  4.0

SUPERSEDES:  SP5766

DESCRIPTION:  Unpacks the files needed to install the Windows 95/98 video driver 
for the Diamond Viper V330 Graphics Controller used in certain models 
of the Deskpro EP, Deskpro EN and Deskpro SB Series (see NOTE above). 
Optionally allows three installation diskettes to be created.  

Enhancements/Fixes: 
  - Adds support for the System Software Manager tool
  - Resolves a system lock-up issue under Chinese operating system locale, 
    when trying to change the display properties.

HOW TO USE:

1. Download the Softpaq to a directory on your hard drive.  The file downloaded is 
a self-extracting executable with the file name based on the Softpaq Number above.

2. From the download directory, execute the SoftPaq.  When executed with no 
parameters, files are extracted into new folders that are created in the current 
directory.   To create the folders in a different directory, specify the complete 
path of the directory as a parameter when executing the SoftPaq:

   SPXXXX <path>

Enter "Y" to confirm and files are unpacked into subdirectories named 
Disk_01, Disk_02, and Disk_03 that are created under the download directory or the 
directory specified.  

3. After the folders disk_01, disk_02 and disk_03 have been created, you may delete 
the self-extracting file downloaded in step 1.

4. The driver may be installed directly from the folders on the download 
directory, or three driver installation diskettes can be created.  

To create installation diskettes, run MAKEDISK.BAT.

To read detailed installation and usage instructions, refer to README.TXT.

5. To install the driver, run INSTALL.EXE from directory disk_01.
For example, select Start, Run, then enter:

   <path>\disk_01\install

   where <path> is the drive and directory chosen in step 2 
                   or a diskette drive letter if installing from diskettes

Follow the on-screen instructions to complete the installation.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.