SOFTPAQ NUMBER: SP9569
PART NUMBER: 120384-001, 120385-001
TITLE: Matrox G100, Millennium G200, Millennium II AGP, 
       and Mystique Video Driver for Windows 95/98
VERSION: 4.18.026 Rev G
LANGUAGE:  English, French, German, Italian, Spanish

CATEGORY: Drivers

DIVISIONS: Desktops

PRODUCTS AFFECTED: 
     Deskpro EN: 6450,6400,6350,6333C,6333,6300CA,6300C,6300,6266
     Deskpro EP: 6450,6400,6350,6333C,6333,6300A,6300,6266C,6266
     Deskpro SB: 6400,6350,6333,6300,6266
     Deskpro 4000: 6333,6300MMX,6266MMX,6233X,6233MMX,6200,6180
     Deskpro 6000: 6333,6300MMX,6266X,6266MMX,6233X,6233MMX,6200,6180
     Deskpro 2000: 6300MMX,6266MMX,6233MMX,6200,6180

NOTE:  This is for Deskpro models with one of the Matrox video controllers
listed below.  One of the Matrox video controllers could also be installed 
as an option in Deskpro models other than the models listed above.  
To determine if your desktop unit has one of the affected Matrox video 
controllers, click on the System icon in the Windows NT Control Panel, 
the Device Manager tab, and the Display Adapters icon.
  
OPERATING SYSTEM:  Microsoft Windows 95,
                   Microsoft Windows 98
                  
SYSTEM CONFIGURATION:
Matrox MGA-G100
Matrox MGA-G200
Matrox Millennium II AGP
Matrox Mistique

PREREQUISITES: N/A

EFFECTIVE DATE: March 22, 1999

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: 4.0

SUPERSEDES: SP9003

DESCRIPTION:  Unpacks the files needed to install the Microsoft Windows 95/98 
video drivers for the Matrox G100,  Millennium G200, Millennium II AGP, and 
Mystique video controllers used in Deskpro computers.
Optionally creates two installation diskettes.

Enhancements/Fixes: 
   - Adds support for System Software Manager

HOW TO USE:

1. Download the Softpaq to a directory on your hard drive.  The file 
downloaded is a self-extracting executable with the file name based on the
Softpaq Number above.

2. From the download directory, execute the SoftPaq.  When executed with no 
parameters, files are extracted into new folders that are created in the 
current directory.   To create the folders in a different directory, specify
the complete path of the directory as a parameter when executing the SoftPaq:

   SPXXXX <path>

Enter "Y" to confirm and folders are created in the download directory or 
the directory specified.

3. After the folders disk_01, disk_02 and disk_03 have been created, you may
delete the self-exctracting file downloaded in step 1.

4. The driver may be installed directly from the folders in the download 
directory, or three driver installation diskettes can be created.  

To create installation diskettes, run MAKEDISK.BAT.

To read detailed installation and usage instructions, refer to README.TXT.

5. To install the driver, run SETUP.EXE from the first installation diskette
or from directory disk_01 if installing from the hard drive.
For example, select Start, Run, then enter:

   <path>\disk_01\setup

   where <path> is the drive and directory chosen in step 2 

6. Follow the on-screen instructions to complete the installation.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.