SOFTPAQ NUMBER:  SP9542
PART NUMBER:  N/A
FILE NAME:  CPQDISP.DRV
TITLE:  Deskpro Windows 95 Graphics Drivers
VERSION:  1.92 Rev B
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS:  Desktops

PRODUCTS AFFECTED:  
Deskpro 4000 5233MMX, 5200MMX, 5166MMX, 6233, 6200, 6180, 5200, 5166, 5133, 5120, 5100
Deskpro 2000 5233MMX, 5200MMX, 5166MMX, 6200, 6180, 5200, 5166, 5133, 5120, 5100
Deskpro XL 6200, 6150, 5133, 5120, 5100, 590, 575, 566, 560, 466, 450
Deskpro 5166, 5150, 5133, 5120, 5100, 590, 575, 4100, 466, 450
Deskpro 486/25, 486/33L, 486/50L, 386/33L, 386/33, 386/25e
Prolinea 5166, 5150, 5133, 5120, 5100, 4100, 590, 575, 466, 450
Prolinea 5120e, 5100e, 575e
All Deskpro I units
All Deskpro XE units
All Deskpro M units

OPERATING SYSTEM:  Microsoft Windows 95

SYSTEM CONFIGURATION:  Compaq S3 V2/GX, ViRGE/GX, CL5434, CL5436, 
CL5446, QVision 1024 I/E, or QVision 1280 I/E/P/P+ Graphics Controller

PREREQUISITES:  N/A

EFFECTIVE DATE:  February 18, 1999 

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION: 4.0

SUPERSEDES:  SP5009 

DESCRIPTION:  This SoftPaq unpacks the files required to install the 
Windows 95 video driver for the above-mentioned Deskpro and ProLinea models. 
Driver support is included for Compaq S3 V2/GX, ViRGE/GX, CL5434, CL5436, 
CL5446, QVision 1024 I/E, and QVision 1280 I/E/P/P+ Graphics Controllers. 
Optionally allows a driver diskette to be created. 

Enhancements/Fixes:

- Adds support for the System Software Manager tool

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into the download 
directory or the directory specified.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. The driver may be installed directly from the files on the download 
directory or a driver diskette can be created. To create a driver diskette,
run MAKEDISK.BAT. To install the driver, go to the Control Panel and select:

   Display/Settings/Change Display Type

Verify that the Adapter Type is one of the controllers listed in
the System Configuration section above.
If it is not, then Cancel and Exit.
If it is, then continue to select:
    
   Change/Have Disk

Type in the path to the download directory or select "Browse" to 
specify the location of the files extracted in step 2 or the diskette.

5. Select OK to install the driver.

6. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies