SOFTPAQ NUMBER:  SP9512
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Deskpro EP, SB, and EN Series Drivers for Compaq 10/100 TX PCI 
        Intel UTP Controller and NC3121 Fast Ethernet NIC for Windows NT
VERSION:  1.56 Rev A 
LANGUAGE:  US English 

CATEGORY:  Drivers

DIVISION:  Desktops

PRODUCTS AFFECTED:  
     "Deskpro EN",SFF 6400,SFF 6350,SFF 6333,SFF 6300C,SFF 6300
     "Deskpro EN",6450,6400,6350,6333C,6333,6300CA,6300C,6300,6266
     "Deskpro EP",6300A,6300,6266C,6266
     "Deskpro SB",6300,6266
     "Deskpro EN",Net PC 6400,Net PC 6300
     "Deskpro EP",6450,6400,6350,6333C,6333
     "Deskpro SB",6400,6350,6333

OPERATING SYSTEM:  Microsoft Windows NT Workstation 4.0

SYSTEM CONFIGURATION:  Compaq 10/100 TX PCI Embedded Intel UTP Controller
                       or NC3121 Fast Ethernet NIC installed

EFFECTIVE DATE:  February 24, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  4.0

SUPERSEDES:  SP7111 (for Windows NT 4.0 only)

DESCRIPTION:  Device drivers for the Compaq 10/100 TX PCI Embedded Intel 
              UTP Controller and NC3121 Fast Ethernet network adapters 
              included with the Deskpro EP, SB, and EN Series. 
              These drivers allow the network adapter to function in various
              network environments. 
 
An optional installation diskette can be created from the unpacked files.

ENHANCEMENTS/FIXES: 
     Added support for System Software Manager
     NOTE: The NT drivers themselves are unchanged from superseded 
           SoftPaq SP6839.  They are just repackaged to support 
           System Software Manager.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

To create the optional installation diskette, run MAKEDISK.BAT and
follow on-screen instructions.

3. After the directory has been created, you may delete the  
self-extracting file downloaded in step 1.

4. For information on driver files provided, refer to the information 
in the file <download path>FILES.TXT.  

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies