SOFTPAQ NUMBER:  SP9507
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Server Support for Microsoft Windows NT 4.0
        (Storage drivers)
VERSION:  2.12 Rev. A
LANGUAGE:  Japanese

CATEGORY:  Drivers

DIVISIONS:  Systems

PRODUCTS AFFECTED:  All Compaq Servers

OPERATING SYSTEM:  Microsoft Windows NT 4.0 (Japanese)

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  January 21, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP8475

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode. This SoftPaq creates two files-a description 
file and a self-extracting executable file.  The self-extracting 
executable file contains Compaq Server Support for Microsoft Windows 
NT 4.0 that supports the following subsystems and features of 
Compaq Servers:
 
    Compaq Fibre Channel Storage System
	Compaq Fibre Channel Host Controllers SCSI Miniport Driver
	Compaq Fibre Channel Array Controllers SCSI Class Driver
	Compaq Fibre Channel Filter Driver
   Compaq ProLiant Storage Systems 
   Compaq SCSI Controllers
	Compaq Dual Channel Integrated Wide-Ultra SCSI-3 Controller	
	Compaq Wide-Ultra SCSI-3 Controller	
	Compaq 32-Bit Fast-Wide SCSI-2/E Controller	
	Fast-SCSI-2 Controller	
	Integrated PCI SCSI-2 Controller 		
	Integrated 32-Bit Fast-SCSI-2/P Controller	
	Integrated 32-Bit Fast-Wide SCSI-2/P Controller
	Integrated Wide-Ultra SCSI Controller	
	Fast-SCSI-2 Controller option board	
	Compaq Dual Channel Wide-Ultra SCSI-3 Controller option board	
	Compaq Wide-Ultra SCSI-3 Controller option board	
	Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board	
	Integrated 32-Bit Fast-Wide SCSI-2/P Controller option board	     
   Compaq Server Support Installation Utility   
   Compaq SMART/SMART-2 Family of Array Controllers
	Compaq SMART/IDA-2/IDA/IAES Array Controllers
	Compaq SMART-2/P and Compaq SMART-2/E Array Controllers
	Compaq SMART-2DH Array Controller
	Compaq SMART-2SL Array Controller
        Compaq Smart Array 3100ES Controller
        Compaq Smart Array 3200 Controller
    
Enhancements/Fixes:

The release of the Compaq Server Support for Microsoft Windows NT 4.0 
Version 2.12 Revision A, primarily supports the following new products: 

-	Compaq Prosignia 720 6/350
-	Compaq Prosignia 720 6/400
-	Compaq ProLiant 400 6/350 Model 1
-	Compaq ProLiant 400 6/350 Model 4300
-	Compaq ProLiant 400 6/400 Model 1
-	Compaq ProLiant 400 6/400 Model 4300
-	Compaq ProLiant 400 6/450 Model 1
-	Compaq ProLiant 5500 6/450-1
-	Compaq ProLiant 5500R 6/450-1
-	Compaq ProLiant 5500 6/450-2
-	Compaq ProLiant 5500R 6/450-2
-	Compaq Smart Array 221 Controller

Compaq Fibre Channel Array Controllers SCSI Class Driver(CPQFCAC.SYS) 
-	Fixed a problem with the CPQFCAC.INF file not recognizing 
	the correct Compaq SSD for Windows NT 4.0 diskette upon insertion.

Compaq Fibre Channel Filter Driver(CPQFCFTR.SYS) 
-	Fixed a problem with the CPQFCFTR.INF file not recognizing the 
	correct Compaq SSD for Windows NT 4.0 diskette upon insertion.

Compaq Fibre Channel Host Controllers SCSI Miniport Driver(CPQFCALM.SYS) 
-	Added support for virtual LUN (Logical Unit Number) capability.  
	This support allows hot adding drives to a Compaq Fibre Channel 
	Host Controller with no targets.
-	Changed version-numbering scheme of the Compaq Fibre Channel Host 
	Controllers SCSI Miniport Driver from 1.xx to 4.xx.
-	Fixed problem with World Wide ID of non-Compaq devices appearing 
	as being byte swapped in Compaq Insight Manager and other applications 
	that gather information from driver.
-	Improved the detection of lost login frames.
-	Fixed a bug that would prevent a Compaq Fibre Channel Host Controller 
	from receiving a fibre channel loop address. 
-	Fixed a problem with the CPQFCALM.INF file not recognizing the correct 
	Compaq SSD for Windows NT 4.0 diskette upon insertion.

Compaq Server Support Setup for Microsoft Windows NT 4.0(SETUP.EXE)
-	Added support to upgrade/downgrade your HAL if Microsoft Service Pack 4 
	is installed on your system.
-	Modified Compaq Server Support Setup for Microsoft Windows NT 4.0 to 
	disallow installation of the Compaq SCSI Controller Driver, the Compaq 
	SMART/SMART-2 Array Controller Driver, or the Compaq Fibre Channel Host 
	Controllers SCSI Miniport Driver if it detects that you have removed the 
	driver through the Windows NT Control Panel.  Once the driver has been 
	uninstalled from the Windows NT Control Panel, you must reboot the system 
	or reinstall the driver through the Windows NT Control Panel.
-	Added a new popup, indicating the supported version of the Compaq Array 
	Configuration Utility that is supported in this Compaq SSD for Windows NT 
	4.0 release, which will appear after the option to install the utility 
	has been selected.
-	Added an enhancement to indicate when you should update the Compaq Array 
	Configuration Utility on your system.
-	Removed the capability for Compaq Server Support Setup for Microsoft 
	Windows NT 4.0 Version 2.12A (or later) to operate on Compaq Professional 
	Workstation products.
-	Added support for the Compaq NC3161 Fast Ethernet NIC.
-	Modified Compaq Server Support Setup for Microsoft Windows NT 4.0 to prompt 
	you to update the Compaq Remote Insight Board/PCI WAN Driver after installing 
	RAS to ensure that a registry setting created by the RAS install has the 
	correct value for this driver. If this driver is not updated after a RAS 
	install is performed, the registry value will be incorrect, disabling the 
	"route add A B" command functionality that was fixed in this release 
	(see the "Compaq Remote Insight Board/PCI WAN Driver(RIBWAN.SYS)" entry 
	in this section).

Compaq SCSI Controller Driver(CPQ32FS2.SYS) 
-	Updated the Compaq SCSI Controller Driver version from 3.19 to 3.21.
-	Added support to the Compaq SCSI Controller Driver for the following 
	new products: 
		Compaq Prosignia 720 6/350
		Compaq Prosignia 720 6/400
		Compaq 64-Bit Dual Channel Wide-Ultra2 SCSI Controller.
-	Fixed a problem with the FASTSCSI.INF file not recognizing the correct 
	Compaq SSD for Windows NT 4.0 diskette upon insertion.
-	Changed Compaq Pseudo Device type from UNSUPPORTED to UNKNOWN.
-	Fixed a performance degradation problem observed on fast disk drives 
	upon removal and reinsertion.
-	Changed the driver name in the file properties from ?Compaq 32-Bit 
	SCSI-2 Controllers? to ?Compaq SCSI Controllers.?

Compaq SMART/SMART-2 Array Controller Driver(CPQARRAY.SYS) 
-	Fixed a problem with the CPQARRAY.INF file not recognizing the correct 
	Compaq SSD for Windows NT 4.0 diskette upon insertion.

For details, refer to NTREADME.HLP in the created support files.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       STOR.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       STOR.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.


Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.