| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP9460 — Compaq Workstation Support Software for Microsoft Windows NT 4.0 (All component drivers)
| SoftPaq Number |
SP9460 |
| Filename |
SP9460.EXE |
| Size |
12247K |
| Date |
01 FEBRUARY 1999 |
| Version |
2.03 Rev a |
| Operating System |
Windows NT 4.0 |
| Products Affected |
All Compaq Professional Workstations |
| Supersedes |
SP8780 |
Readme
SOFTPAQ NUMBER: SP9460
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Compaq Workstation Support Software for Microsoft Windows NT 4.0
(All component drivers)
VERSION: 2.03 Rev a
LANGUAGE: English
CATEGORY: Drivers
DIVISIONS: Workstations
PRODUCTS AFFECTED: All Compaq Professional Workstations
OPERATING SYSTEM: Microsoft Windows NT 4.0
SYSTEM CONFIGURATION: N/A
PREREQUISITES: N/A
EFFECTIVE DATE: 01 FEBRUARY 1999
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 2.x
SUPERSEDES: SP8780
DESCRIPTION: This SoftPaq creates two files -- a description file and a
large self-extracting executable file. The self-extracting executable file
contains Compaq Workstation Support Software for Microsoft Windows NT 4.0
that supports the following subsystems and features of Compaq Professional
Workstations:
Adaptec AIC-78xx PCI SCSI Controller
Compaq ATAPI/IDE Controller
Compaq Ethernet or Fast Ethernet Network Interface Controllers
Compaq Fast Ethernet NIC NC1120
Compaq Fast Ethernet Embedded NIC NC3121
Compaq Fast Ethernet NIC NC3120
Compaq Fast Ethernet NIC NC3121
Compaq Fast Ethernet NIC NC3161
Compaq Netelligent/NetFlex-3 Family of Controllers
Compaq Netelligent 10/100 TX Embedded UTP/Coax Controller
Compaq Netelligent 10/100 TX Embedded UTP/AUI Controller
Compaq Netelligent 10/100 TX Embedded UTP Controller
Compaq NetFlex-3 Embedded Controller
Compaq Netelligent 10/100 TX PCI UTP Controller
Compaq Netelligent 10 T PCI UTP Controller
Compaq Netelligent 10/100 TX PCI UTP Dual Port Controller
Compaq NetFlex-3 network adapter monitoring, configuration and duplex
utility
Compaq ProLiant Storage System
Compaq Dual Channel Integrated Wide-Ultra SCSI-3 Controller
Compaq Wide-Ultra SCSI-3 Controller*
Compaq 32-Bit Fast-SCSI-2 Controller
Integrated 32-Bit Fast-SCSI-2/P Controller
Integrated 32-Bit Fast-Wide SCSI-2/P Controller (formerly named the 32-Bit Wide-Ultra SCSI-2/P Controller)
Adaptec AIC-78xx PCI SCSI Controller
Symbios Wide Ultra2 PCI SCSI Controller
Compaq SMART/SMART-2 Family of Array Controllers
Compaq SMART/IDA-2/IDA/IAES Controllers
Compaq SMART-2/P and Compaq SMART-2/E Controllers
Compaq SMART-2DH Controller
Compaq SMART-2SL Controller
Compaq SMART 3100ES Controller
Compaq System Management/Health Driver
Compaq Workstation Support Software Installation Utility
Compaq PowerStorm 300 Graphics Controller
Diamond Multimedia Fire GL 4000 Graphics Controller
ELSA GLoria-L 3D Graphics Controller
ELSA GLoria-XL 3D Graphics Controller
ELSA GLoria Synergy 3D Graphics Controller
ELSA GLoria Synergy+ 3D Graphics Controller
ESS AudioDrive Controller
Matrox Millennium II PCI Graphics Controller
Matrox Millennium G200 PCI and AGP Graphics Controllers
Matrox Productiva G100 Multi-Monitor Series (MMS) Graphics Controller
STB Systems MVP PRO 128 Graphics Controller
STB Systems MVP Workstation Graphics Controller
Enhancements/Fixes:
Features in Compaq Workstation SSD for Windows NT 4.0 Version 2.03 Rev. A
The release of the Compaq Workstation Support Software for Microsoft
Windows NT 4.0, Version 2.03 Revision A, primarily supports the following
new products:
- Matrox Productiva G100 Multi-Monitor Series Graphics Controller
- Matrox Millennium G200 PCI Graphics Controller
- Symbios Wide Ultra2 PCI SCSI Controller
Matrox Productiva G100 MMS Graphics Controller (MGA64.SYS)
- Added support for the new Matrox Productiva G100 Multi-Monitor
Series Graphics Controller Driver Version 4.00 (build 4.0.9).
Important: You must install Microsoft Windows NT Service Pack 3 (or higher)
before you install the Matrox Productiva G100 Multi-Monitor Series Graphics
Controller Driver.
Matrox Millennium II PCI/Millennium G200 PCI/Millennium G200 AGP Graphics Controllers (MGA64.SYS)
- Updated the Matrox Millennium II PCI/Millennium G200 PCI/Millennium
G200 AGP Driver to Version 4.00 (build 4.0.152).
- Added support for the Matrox Millennium G200 PCI Graphics Controller.
- Allows mixing of the Matrox Millennium II PCI, Millennium G200 AGP,
and Millennium G200 PCI graphics controllers in a single system for
multi-monitor support.
Important: The Matrox Millennium II PCI/Millennium G200 PCI/Millennium G200 AGP
Driver does not support the Matrox MGA Millennium Graphics Controller. To install
the latest driver for the Matrox MGA Millennium Graphics Controller, use Compaq
Workstation Support Software for Microsoft Windows NT 4.0 Version 2.00A. You can
obtain Compaq Workstation Support Software for Microsoft Windows NT 4.0 Version
2.00A from the Compaq website (www.compaq.com).
Symbios Wide Ultra2 PCI SCSI Controller (SYMC8XX.SYS)
- Added support for the new Symbios Wide Ultra2 PCI SCSI Controller Driver
Version 4.08.00.
Compaq Remote ROM Flash and Security Settings Service (CPQRS.SYS)
- Updated the Compaq Remote ROM Flash and Security Settings Service Driver
from Version 1.01 to 1.04.
- Added improved timers to the AMD ROM flash routines.
For details, refer to NTREADME.HLP in the created support files.
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive and change
to that directory. The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.
2. From that drive and directory, execute the downloaded file
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for
the files, or default to the download directory.
The following files will be created:
README.TXT
NTWSD.EXE
3. After the files have been created, you may delete the
self-extracting file downloaded in step 1.
4. From the directory in which the files are created, execute the
self-extracting executable:
NTWSD.EXE [ENTER]
5. Follow the instructions on the screen to extract (unzip) the support
software files to a folder on your hard drive and run the program
SETUP.EXE to install the software.
Copyright 1999, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|