PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP9413

SP9413 — Remote ROM Flash Utilities for Deskpro 4000 and 6000 (686V ROM)

SoftPaq Number SP9413
Filename sp9413.exe
Size 374K
Date February 15, 1999
Version 686V_121598
Operating System All
Products Affected Deskpro 4000 and Deskpro 6000 models 6233MMX, 6266MMX, 6300MMX, and 6333 with a 686V Family ROM NOTE: Run F10 Setup to determine the ROM Family and ROM date.
Supersedes SP7991

  Download sp9413.exe  


Readme

SOFTPAQ NUMBER:  SP9413
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Remote ROM Flash Utilities for Deskpro 4000 and 6000 (686V ROM)
VERSION:  686V_121598
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Desktops

PRODUCTS AFFECTED:  Deskpro 4000 and Deskpro 6000 models 6233MMX, 6266MMX,
                    6300MMX, and 6333 with a 686V Family ROM 
             NOTE:  Run F10 Setup to determine the ROM Family and ROM date.

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  A remote configuration and program loading tool for networks
                (Example: Intel LANDesk Configuration Manager)

EFFECTIVE DATE:  February 15, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  4.X

SUPERSEDES:  SP7991

DESCRIPTION:  Creates a set of utility files that can be used with a remote 
configuration tool such as Intel LANDesk Configuration Manager (LCM) to 
update or restore the 12/15/98 version System ROM in the Deskpro 4000 and 
Deskpro 6000 Series models with a 686V Family ROM.  The ROM Family and ROM 
date can be determined by running F10 Setup.

The standard ROMPaq will not work for updating a PC remotely over a network.

Enhancements/Fixes in this version:
 - Fixes an issue where the CD-ROM drive would not boot a bootable CD.
 - Fixes an issue during NT installation that caused a lockup when an 
   Ultra-Wide SCSI driver was specified in the diskette drive.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" confirms the unpacking of several files. 

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. Refer to the file ASSIGNPW.TXT for instructions about the use of the 
utility programs.

Copyright 1998,1999 Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home