SOFTPAQ NUMBER:  SP9018
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Armada Specific Models CardWare for Windows NT 4.0 
VERSION:  2.11 Rev F
LANGUAGE:  US English

CATEGORY:  Drivers

DIVISIONS:  Portables

PRODUCTS AFFECTED:  Compaq Armada 7400 6266/T/4000/D/0/1
		    Compaq Armada 7400 6266/T/4000/D/0/3
		    Compaq Armada 7400 6300/T/6000/D/M/1
		    Compaq Armada 7400 6300/T/6000/D/0/1
		    Compaq Armada 7400 6300/T/6000/D/0/3
		    Compaq Armada 7400 6333/T/6.4/D/M/1
		    Compaq Armada 7400 6333/T/6.4/D/0/1
		    Compaq Armada 7400 6333/T/6.4/D/M/3
		    Compaq Armada 7400 6333/T/6.4/D/0/3
		    Compaq Armada 7400 6366/T/10.0/V/M/1
		    Compaq Armada 7400 6366/T/10.0/V/M/3
		    Compaq Armada 7800 6266/T/5000/D/M/1
		    Compaq Armada 7800 6266/T/5000/D/0/1
		    Compaq Armada 7800 6266/T/5000/D/0/3
		    Compaq Armada 7800 6266/T/8000/D/M/1
		    Compaq Armada 7800 6266/T/8000/D/0/1
		    Compaq Armada 7800 6266/T/8000/D/0/3
		    Compaq Armada 7800 6300/T/8000/V/M/1
		    Compaq Armada 7800 6300/T/8000/V/0/1
		    Compaq Armada 7800 6300/T/8000/V/0/3
		    Compaq Armada 7800 6366/T/14.0/V/M/1
		    Compaq Armada 7800 6366/T/14.0/V/0/1
		    Compaq Armada 7800 6366/T/14.0/V/M/3
		    Compaq Armada 7800 6366/T/14.0/V/0/3

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE: 26 January 1999

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: 3.1

SUPERSEDES: SP7809

DESCRIPTION: Unpacks the files needed to install the Armada Specific
Models CardWare for Windows NT 4.0 for the models listed above in
PRODUCTS AFFECTED.  Optionally creates three installation diskettes.
 
Enhancements/Fixes: 

- Edited and updated README.1ST for CardWare (DISK1).

- Removed old Armada 7400/7800 configuration information.

- Resolved Xircom 10/100 Cardbus LED and device name issue.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

To create the 3 optional installation diskettes, run MAKEDISK.BAT and 
follow on-screen instructions.

3. After the directory has been created, you may delete the  
self-extracting file downloaded in step 1.

4. To install from diskette, follow the steps in the README.TXT file.
To install from the download directory, follow the steps in the README.TXT
file.  However, for the location of the installation software, specify
the directory path of the files unpacked in step 2 above.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

Copyright 1999, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies