SOFTPAQ NUMBER:  SP9013
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Workstation Support Software for Microsoft Windows NT 4.0
        (SCSI driver)
VERSION:  2.02 Rev. a
LANGUAGE:  Japanese

CATEGORY:  Drivers

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  All Compaq Professional Workstations

OPERATING SYSTEM:  Microsoft Windows NT 4.0 (Japanese)

SYSTEM CONFIGURATION:  N/A

PREREQUISITES: N/A

EFFECTIVE DATE:  December 8, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP8761

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode.  This SoftPaq creates two files -- a description 
file and a large self-extracting executable file.  The self-extracting 
executable file contains Compaq Workstation Support Software for 
Microsoft Windows NT 4.0 that supports the following subsystems and 
features of Compaq Professional Workstations:

   Compaq SCSI Controllers
	Compaq Dual Channel Wide-Ultra SCSI-3 Controller	
        Compaq Wide-Ultra SCSI-3 Controller
        Compaq 32-Bit Fast-Wide SCSI-2/E Controller
      	Compaq 32-Bit Fast-SCSI-2 Controller
    	Integrated 32-Bit Fast-SCSI-2/P Controller	
    	Integrated 32-Bit Fast-Wide SCSI-2/P Controller
    	Integrated Wide-Ultra SCSI Controller
    	Compaq 32-Bit Fast-SCSI-2 Controller option board	
    	Compaq 32-Bit Fast-Wide SCSI-2/P Controller option board
	Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board    	
	Compaq Wide-Ultra SCSI-3 Controller option board   
   Compaq Workstation Support Software Installation utility
 
Enhancements/Fixes:

Features in Compaq Workstation SSD for Windows NT 4.0 Version 2.02 Rev. A

The release of the Compaq Workstation Support Software for Microsoft 
Windows NT 4.0, Version 2.02 Revision A, is a maintenance release that 
updates the driver listed below. 

Important: This is the first release of the Compaq Workstation SSD for 
Windows NT 4.0 that is not available as diskette images. If you obtain the 
Compaq Workstation SSD for Windows NT 4.0 in SoftPaq format, the SoftPaq 
extracts its files to a directory on the hard drive. You cannot obtain the 
Workstation SSD for Windows NT 4.0 version 2.02A (or later) as a SoftPaq 
that contains diskette images.

Compaq ProLiant Storage System Driver (PRLNTSS.SYS) 

? Updated the Compaq ProLiant Storage System Driver from Version 2.03 to 2.04.
? Added support to the Compaq ProLiant Storage System Driver for the Compaq 
  ProLiant Storage System. The updated Compaq ProLiant Storage System Driver 
  provides support for 15 drives and checks alarms for fan, temperature, and 
  Hot Plug events.

For details, refer to NTREADME.HLP in the created support files.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       SCSI.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       SCSI.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.