| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP8764 — MS-DOS SCSI Support Diskette for Compaq 32-Bit Fast-SCSI-2 Controller and Compaq SMART Array Controllers.
| SoftPaq Number |
SP8764 |
| Filename |
SP8764.EXE |
| Size |
314K |
| Date |
30 November 1998 |
| Version |
2.17A |
| Operating System |
DOS |
| Products Affected |
Compaq 32-Bit Fast-SCSI-2 Controller and Compaq SMART Array Controllers. |
| Supersedes |
SP8488 |
Readme
SOFTPAQ NUMBER: SP8764
PART NUMBER: 181751-402
TITLE: MS-DOS SCSI Support Diskette for Compaq 32-Bit Fast-SCSI-2
Controller and Compaq SMART Array Controllers.
VERSION: 2.17A
LANGUAGE: English
CATEGORY: Drivers/Misc.
PRODUCTS AFFECTED:
Compaq 32-Bit Fast-SCSI-2 Controller and Compaq SMART
Array Controllers.
OPERATING SYSTEM AND VERSION: DOS
SYSTEM CONFIGURATION: N/A
PREREQUISITE: N/A
EFFECTIVE DATE: 30 November 1998
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 2.X
SUPERSEDES: SP8488
DESCRIPTION:
Contains the following DOS drivers:
- FWS2ASPI.SYS Provides DOS ASPI support on all COMPAQ 32-Bit
Fast-SCSI-2 and COMPAQ 32-Bit Fast-Wide SCSI-2
controllers and support for accessing int 13h SCSI
devices in virtual mode without virtual DMA services.
- FWS2CD.SYS Provides ASPI-based support for reading ISO 9660
CD-ROMs under Microsoft's CD-ROM extensions, MSCDEX.EXE.
- FWS2DISK.SYS Provides full DOS support for up to 24 logical
drives when used with FWS2ASPI.
- SMRTSCSI.SYS Provides support on SMART SCSI Array controller for
accessing logical drives in protected mode. Also
supports multiple controllers and up to 24 logical
drives.
- MSCDEX.EXE Provides CD-ROM support under DOS.
Fixes:
=============
FWS2ASPI.SYS
===================================================================
Added support for the Dual-Channel Ultra2-Wide SCSI-3
controller.
HOW TO USE:
1. Obtain a formatted 1.44 MB diskette.
2. Download the SoftPaq to a directory on your hard drive and change to that directory.
The file that is downloaded is SP8764.EXE.
3. From that drive and directory, execute the SoftPaq file:
SP8764 [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to
create diskette.
4. After the diskette is created, you may delete the downloaded file
SP8764.EXE if you wish.
5. Run README.COM on the diskette for instructions on installing and using the
software.
Copyright 1998, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|