SOFTPAQ NUMBER:  SP8724  
PART NUMBER:  277209
FILE NAME:  N/A
TITLE:  Deskpro Matrox Video Drivers for Windows NT 4.0 
VERSION:  3.60.116 Rev G
LANGUAGE:  English, French, German, Italian, Spanish, Dutch, Swedish, 
           Norwegian, Brazilian Portuguese, Danish, Finnish, Japanese, 
           Traditional Chinese, Simplified Chinese, Korean, Thai

CATEGORY:  Drivers

DIVISIONS:  Desktops

PRODUCTS AFFECTED: Compaq Deskpro models with a Matrox Performance, Millennium II, 
                   G100, or Millennium G200  video controller including: 
Deskpro EN Series 6266, 6300, 6350, 6400, 6300C, 6300CA, 6333C, 6450
Deskpro EP Series 6266C, 6266, 6300, 6300A, 6333, 6333C, 6350, 6400, 6450
Deskpro 2000 models:  5133, 6200
Deskpro 6000 models:  5166, 5200, 6180, 6200

NOTE:  One of the Matrox video controllers could also be installed in other 
Deskpro models as an option.  To determine if your desktop unit has a 
Matrox Millennium, Performance or Millennium II controller, click on the 
System icon in the Windows NT Control Panel, the Device Manager tab, and the 
Display Adapters icon.

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  N/A

PREREQUISTES:  N/A

EFFECTIVE DATE:  October 15, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  N/A

DESCRIPTION:  Unpacks the files needed to install the Microsoft Windows NT 4.0
display driver for the Matrox Performance, Millennium II, G-100, and G-200 
Video Controllers used in the above-mentioned Deskpro computers.  
Optionally creates three installation diskettes.

HOW TO USE:

1. Download the Softpaq to a directory on your hard drive.  The file downloaded is 
a self-extracting executable with the file name based on the Softpaq Number above.

2. From the download directory, execute the SoftPaq.  When executed with no 
parameters, files are extracted into new folders that are created in the current 
directory.   To create the folders in a different directory, specify the complete 
path of the directory as a parameter when executing the SoftPaq:

   SPXXXX <path>

Enter "Y" to confirm and folders are created in the download directory or the 
directory specified.

3. After the folders disk_01 and disk_02 have been created, you may delete the 
self-exctracting file downloaded in step 1.

4. The driver may be installed directly from the folders on the download 
directory, or two driver installation diskettes can be created.  

To create installation diskettes, run MAKEDISK.BAT.

To read detailed installation and usage instructions, refer to README.TXT.

5. To install the driver, run SETUP.EXE from directory disk_01.
For example, select Start, Run, then enter:

   <path>\disk_01\setup

   where <path> is the drive and directory chosen in step 2 
                   or a diskette drive letter if installing from diskettes

Follow the on-screen instructions to complete the installation.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.