PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP8703

SP8703 — Compaq Microcom 808 Firmware (Domestic)

SoftPaq Number SP8703
Filename sp8703.exe
Size 799K
Date October 21, 1998
Version 1.10.40
Operating System All
Products Affected Compaq Microcom 808 Integrated Access Device
Supersedes SP5791 (firmware only)

  Download sp8703.exe  


Readme

SOFTPAQ NUMBER:  SP8703
PART NUMBER:  N/A
FILE NAME:  HAR11Q03.BIN
TITLE:  Compaq Microcom 808 Firmware (Domestic)
VERSION:  1.10.40
LANGUAGE:  English

CATEGORY:  Software Solutions

DIVISIONS:  Comm-Network

PRODUCTS AFFECTED:  Compaq Microcom 808 Integrated Access Device

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  October 21, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.01

SUPERSEDES:  SP5791 (firmware only)
     
DESCRIPTION:  Unpacks the files required to install the firmware for 
domestic installations of the Compaq Microcom 808, an ISDN remote access 
device with built-in Ethernet hub.  

The files are:

HAR11Q03.BIN - Firmware binary file
README.TXT   - Installation instructions
SP8703.TXT   - Doc file for this SoftPaq

Enhancements/Fixes:
 - Fixes TFTP (Trivial File Transfer Protocol) Server timeouts.
 - Prevents incompatible firmware from being downloaded to hardware.
 - Fixes problem where B2 channel information was not saved during upload.
 - DHCP (Dynamic Host Configuration Protocol) reassigns assigned 
   IP addresses. 
 - Fixes POTS (Plain Old Telephone Service) phone line failure with 
   "no dial tone". 
 - Interoperablity with Ascend-4000 router.
 
HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. Refer to README.TXT for detailed instructions on installing and 
using the software.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home