| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP8630 — Armada Specific Models S3 M5 Video Driver for Windows NT 4.0
| SoftPaq Number |
SP8630 |
| Filename |
sp8630.exe |
| Size |
284K |
| Date |
October 12, 1998 |
| Version |
3.25.21 Rev A |
| Operating System |
Windows NT 4.0 |
| Products Affected |
Compaq Armada 7400 6266/T/4000/D/0/1 Compaq Armada 7400 6266/T/4000/D/0/3 Compaq Armada 7400 6300/T/6000/D/M/1 Compaq Armada 7400 6300/T/6000/D/0/1 Compaq Armada 7400 6300/T/6000/D/0/3 Compaq Armada 7800 6266/T/5000/D/M/1 Compaq Armada 7800 6266/T/5000/D/0/1 Compaq Armada 7800 6266/T/5000/D/0/3 Compaq Armada 7800 6266/T/8000/D/M/1 Compaq Armada 7800 6266/T/8000/D/0/1 Compaq Armada 7800 6266/T/8000/D/0/3 Compaq Armada 7800 6300/T/8000/V/M/1 Compaq Armada 7800 6300/T/8000/V/0/1 Compaq Armada 7800 6300/T/8000/V/0/3 |
| Supersedes |
SP7837 |
Readme
SOFTPAQ NUMBER: SP8630
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Armada Specific Models S3 M5 Video Driver for Windows NT 4.0
VERSION: 3.25.21 Rev A
LANGUAGE: English
CATEGORY: Drivers
DIVISIONS: Portables
PRODUCTS AFFECTED: Compaq Armada 7400 6266/T/4000/D/0/1
Compaq Armada 7400 6266/T/4000/D/0/3
Compaq Armada 7400 6300/T/6000/D/M/1
Compaq Armada 7400 6300/T/6000/D/0/1
Compaq Armada 7400 6300/T/6000/D/0/3
Compaq Armada 7800 6266/T/5000/D/M/1
Compaq Armada 7800 6266/T/5000/D/0/1
Compaq Armada 7800 6266/T/5000/D/0/3
Compaq Armada 7800 6266/T/8000/D/M/1
Compaq Armada 7800 6266/T/8000/D/0/1
Compaq Armada 7800 6266/T/8000/D/0/3
Compaq Armada 7800 6300/T/8000/V/M/1
Compaq Armada 7800 6300/T/8000/V/0/1
Compaq Armada 7800 6300/T/8000/V/0/3
OPERATING SYSTEM: Microsoft Windows NT 4.0
SYSTEM CONFIGURATION: N/A
PREREQUISITES: N/A
EFFECTIVE DATE: October 12, 1998
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 3.1
SUPERSEDES: SP7837
DESCRIPTION: Unpacks the files needed to install the Compaq S3 M5
Video Driver for Microsoft Windows NT 4.0 for the Armada models
listed in PRODUCTS AFFECTED. Optionally creates installation diskette.
Enhancements/Fixes:
- Resolves issue where non-DDC monitor settings were not being restored
after a Non-DDC monitor was removed and reconnected between shutdown
sequences.
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename
based on the SoftPaq Number above.
2. Execute the downloaded file and follow the on-screen instructions.
Enter "Y" to confirm the unpacking of files into the download directory.
3. After the files have been unpacked, you may delete the self-extracting file
downloaded in step 1.
4. For installation instructions, refer to the README.TXT file.
5. After the installation is completed, you may delete the files unpacked
in step 2.
Copyright 1998, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|