PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP8603

SP8603 — Workstation GLoria-Synergy/Synergy+ Drivers for Windows NT 4.0

SoftPaq Number SP8603
Filename sp8603.exe
Size 2340K
Date September 25, 1998
Version 5.33 Rev B VENDOR VERSION NUMBER: 5.33.02.310
Operating System Windows NT 4.0
Products Affected Compaq Professional Workstation 5100, 6000, AP200, AP400, AP500, or SP700 using the GLoria-Synergy 3D Graphics Controller; Compaq Professional Workstation AP200, AP400, AP500, or SP700 using the GLoria-Synergy+ 3D Graphics Controller NOTE: The GLoria-Synergy and Synergy+ 3D Graphics Controllers are standard equipment on selected Workstation models only, but could be an option installed on other models.
Supersedes SP7542

  Download sp8603.exe  


Readme

SOFTPAQ NUMBER:  SP8603
PART NUMBER:  277052-003, 277053-003, 277054-003
FILE NAME:  N/A
TITLE:  Workstation GLoria-Synergy/Synergy+ Drivers for Windows NT 4.0 
VERSION:  5.33 Rev B
VENDOR VERSION NUMBER: 5.33.02.310
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstation 5100, 6000, AP200, AP400, 
                    AP500, or SP700 using the GLoria-Synergy 3D Graphics Controller;
                    Compaq Professional Workstation AP200, AP400, AP500, or SP700 
                    using the GLoria-Synergy+ 3D Graphics Controller
NOTE:  The GLoria-Synergy and Synergy+ 3D Graphics Controllers are standard 
equipment on selected Workstation models only, but could be an option 
installed on other models.  

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  GLoria-Synergy 3D Graphics Controller (PCI), or
                       GLoria-Synergy+ 3D Graphics Controller (AGP)

PREREQUISITES:  N/A

EFFECTIVE DATE:  September 25, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP7542

DESCRIPTION:  Creates the 3-diskette set, "Workstation GLoria-Synergy/Synergy+ 
Drivers for Windows NT 4.0." The GLoria-Synergy Controller uses the PCI bus.  The 
GLoria-Synergy+ Controller uses the Accelerated Graphics Port (AGP) bus.

Enhancements/Fixes:  
 - Fixes problem where the driver did not find all installed Synergy controllers
   on some systems.
 - Fixes Texas Instruments vendor ID.

HOW TO USE:

1.  Obtain 3 formatted 1.44-MB diskettes.

2.  Download the SoftPaq to a directory on your hard drive and change to that 
directory.  The file that is downloaded is an executable with a filename based 
on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file and follow the 
on-screen instructions.  You will be prompted to insert the formatted diskettes 
in a drive to create the diskettes.

4.  After the diskettes have been created, you may delete the SoftPaq file 
downloaded in step 2.

5.  To Install, see section 2 in the file README.TXT on the first diskette.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks 
of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home