PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP8571

SP8571 — Compaq Workstation Support Software for Microsoft Windows NT 4.0 (Network Interface Controller Drivers)

SoftPaq Number SP8571
Filename sp8571.exe
Size 1748K
Date September 28, 1998
Version 2.00 Rev a
Operating System Windows NT 4.0
Products Affected Compaq Professional Workstations
Supersedes SP8112

  Download sp8571.exe  


Readme

SOFTPAQ NUMBER:  SP8571
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Workstation Support Software for Microsoft Windows NT 4.0
        (Network Interface Controller Drivers)
VERSION:  2.00 Rev a
LANGUAGE:  Japanese

CATEGORY:  Drivers

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstations

OPERATING SYSTEM:  Microsoft Windows NT 4.0 (Japanese)

SYSTEM CONFIGURATION:  N/A

PREREQUISITES: N/A

EFFECTIVE DATE:  September 28, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP8112

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode.  This SoftPaq creates two files -- a description 
file and a self-extracting executable file.  The self-extracting 
executable file contains Compaq Workstation Support Software for 
Microsoft Windows NT 4.0 that supports the following subsystems and 
features of Compaq Professional Workstations:
 
   Netelligent Family of Controllers
   	Compaq Netelligent 10 T/2 PCI UTP/Coax Controller
    	Compaq Netelligent 10 T ISA UTP Controller	
    	Compaq Netelligent 10 T/2 ISA UTP/Coax Controller
    	Compaq Netelligent 10 T PCI UTP Controller
    	Compaq Netelligent 10/100 TX PCI UTP Controller
    	Compaq Netelligent Dual 10/100 TX PCI UTP Controller	
   NetFlex-3 Network Adapter Family
    	Compaq NetFlex-3/P Controller	
    	Compaq NetFlex-3/E Controller	
   NetFlex-3 network adapter monitoring, configuration and duplex utility
   Compaq 10/100 TX Embedded Intel WOL UTP Controller
   Compaq 10/100 TX PCI Intel UTP Controller
   Compaq Workstation Support Software Installation utility


Enhancements/Fixes:

The release of the Compaq Workstation Support Software for Microsoft 
Windows NT 4.0, Version 2.00 Revision A, supports the following Compaq 
Professional Workstations:

?	Compaq Professional Workstation SP700
?	Compaq Professional Workstation AP500
?	Compaq Professional Workstation AP400
?	Compaq Professional Workstation AP200
?	Compaq Professional Workstation 8000
?	Compaq Professional Workstation 6000
?	Compaq Professional Workstation 5100
?	Compaq Professional Workstation 5000

This release is the first Compaq Workstation SSD for Windows NT release to 
support workstation-only products.

Note:  The Compaq Support Software for Microsoft Windows NT 4.0, which 
supported Compaq Professional Workstations and Compaq ProLiant and ProSignia 
Servers, is no longer a combined product. The two new products are Compaq 
Workstation Support Software for Microsoft Windows NT 4.0 Version 2.00A 
(or later) for Compaq Professional Workstations and Compaq Server Support for 
Microsoft Windows NT 4.0 Version 2.10A (or later) for Compaq ProLiant and 
ProSignia Servers.

Compaq Advanced Network Control Utility (NETFLX3.EXE)
?	Fixed BNC Options that were being configured incorrectly.
?	Added TxIntegrityFrequrcy as a new registry Parameter for non-paired 
	network interface controllers to prevent unnecessary heartbeats.


For details, refer to NTREADME.HLP in the created support files.

 
HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       NICS.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       NICS.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home