PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP8492

SP8492 — Presario 1810 System ROM Update

SoftPaq Number SP8492
Filename sp8492.exe
Size 359K
Date September 14, 1998
Version F0A (09/03/98)
Operating System All
Products Affected Compaq Presario 1810

  Download sp8492.exe  


Readme

SOFTPAQ NUMBER:  SP8492
PART NUMBER:  347735-004
FILE NAME:  N/A
TITLE:  Presario 1810 System ROM Update 
VERSION:  F0A (09/03/98)
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Consumer

PRODUCTS AFFECTED:  Compaq Presario 1810

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  September 14, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.0

SUPERSEDES:  N/A

DESCRIPTION:  This SoftPaq creates a bootable ROMPaq Update Diskette, 
which can be used to update the System ROM for the Presario 1810.

Enhancements/Fixes:

   - Updates Intel Pentium II microcode.
   - Fixes problem where system shuts off immediately after it is 
     powered on.
   - Fixes problem on units with 128 MB of RAM where status bar indicated 
     that a save to disk was finished before the operation was complete.

HOW TO USE:

1.  Format a 1.44-MB diskette.

2.  Download the SoftPaq to a temporary, empty directory on your
    hard drive and change to that directory.  The file downloaded
    is a self-extracting executable with a filename based on the
    SoftPaq Number above.

3.  From that drive and directory, execute the SoftPaq file.
    You will be prompted to place the formatted 1.44 MB diskette
    into a diskette drive to create the ROMPaq diskette.

4.  After the diskette is created, you may delete the downloaded
    file if you wish.

5.  Shutdown and turn off the computer.  Wait 5 seconds.  Place the 
    ROMPaq diskette into drive A: and turn on the power, allowing the 
    computer to boot from the diskette.

6.  The ROMPaq diskette will automatically update the System ROM and 
    notify you when the update is finished.

    CAUTION:  DO NOT TURN OFF YOUR COMPUTER DURING THE UPDATE PROCESS

7.  When the ROM update is finished, you will need to turn the computer 
    off and back on for the changes to be in effect.  Remove the ROMPaq 
    diskette from the computer.  Turn the computer's power switch OFF, 
    wait 5 seconds, then turn the switch ON again.


Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home