PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP8457

SP8457 — Workstations Video ROM Upgrade for Gloria-Synergy+ Graphics Controller

SoftPaq Number SP8457
Filename sp8457.exe
Size 508K
Date November 11, 1998
Version 8.06 Rev A VENDOR VERSION NUMBER: 8.06.01
Operating System Windows 95, Windows 98, Windows NT 3.51, Windows NT 4.0
Products Affected Compaq Professional Workstation AP200, AP400, AP500, or SP700 using the GLoria-Synergy+ 3D Graphics Controller NOTE: The GLoria-Synergy+ 3D Graphics Controller is standard equipment on selected Workstation models only, but could be an option installed on other models.

  Download sp8457.exe  


Readme

SOFTPAQ NUMBER:  SP8457
PART NUMBER:  386303-001
FILE NAME:  N/A
TITLE:  Workstations Video ROM Upgrade for Gloria-Synergy+ Graphics Controller
VERSION:  8.06 Rev A
VENDOR VERSION NUMBER: 8.06.01
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstation AP200, AP400, AP500, or SP700 
using the GLoria-Synergy+ 3D Graphics Controller
NOTE:  The GLoria-Synergy+ 3D Graphics Controller is standard equipment on 
selected Workstation models only, but could be an option installed on other models.

OPERATING SYSTEM:  Microsoft Windows 95, 
                   Microsoft Windows 98,
                   Microsoft Windows NT 3.51,
                   Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  GLoria-Synergy+ 3D Graphics Controller (AGP)

PREREQUISITES:  N/A

EFFECTIVE DATE:  November 11, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  N/A

DESCRIPTION:  Creates a bootable diskette that can be used to upgrade the 
firmware ("flash the ROM") on the GLoria-Synergy+ 3D Graphics Controller, 
an AGP (Accelerated Graphics Port) controller used in selected Professional
Workstations.

Enhancements/Fixes:
 - Fixes VGA palette snooping on Professional Workstation AP200.

HOW TO USE:

1.  Obtain 1 formatted 1.44-MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to that 
directory.  The file that is downloaded is an executable with a filename based 
on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file and follow the 
on-screen instructions.  You will be prompted to insert the formatted diskette 
in a drive to create the diskette.

4.  After the diskette has been created, you may delete the SoftPaq file 
downloaded in step 2.

5.  To upgrade the GLoria-Synergy+ firmware, first power down the workstation.  
Then insert the created diskette and turn the workstation on, allowing it to 
boot from the diskette.  The video ROM upgrade program will run automatically.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks 
of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home