SOFTPAQ NUMBER:  SP8454
PART NUMBER:  388455-001
FILE NAME:  N/A
TITLE:  Deskpro Windows 3.1 Support for Matrox Video
VERSION:  1.51.007 Rev A
LANGUAGE:  English 

CATEGORY:  Drivers	

DIVISIONS:  Desktops

PRODUCTS AFFECTED:  
Selected Compaq Deskpro models with a Matrox Millennium, Performance, 
Millennium II, G100, or G200 Video Controller, including: 
Deskpro EN Series, Deskpro EP Series, 
Deskpro 2000 5133, Deskpro 2000 6200, Deskpro 5120, Deskpro 5133,
Deskpro 5150, Deskpro 5166, Deskpro 6000 5166, 
Deskpro 6000 5200, Deskpro 6000 6180, Deskpro 6000 6200

OPERATING SYSTEM:  Microsoft Windows 3.1 or 3.11

SYSTEM CONFIGURATION:  N/A	

EFFECTIVE DATE:  September 24, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.x

SUPERSEDES:  N/A

DESCRIPTION: Unpacks the files needed to install Windows 3.1 video
drivers for the Matrox Performance, Millennium II, G100, and G200
Video Controller used in the above-referenced Deskpro models.  
Optionally allows two driver diskettes to be created.

HOW TO USE:

1. Download the SoftPaq to a temporary, EMPTY directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:     SPxxxx <path> 
Enter "Y" to confirm and files are unpacked into the download 
directory or the directory specified.  A subdirectory is also
created containing  driver files.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. The driver may be installed directly from the files on the download 
directory or driver diskette can be created.  
To create a driver diskette, run MAKEDISK.BAT.
To install the driver, run the downloaded file SETUP.EXE.  
For example, from Windows Program Manager select File, Run,
then type in the path to the download directory containing the files 
extracted in step 2 followed by the command SETUP and press enter:
   c:\<path>\disk_01\setup

Or if installing from a created diskette, enter:

   a:\disk_01\setup 

Follow the on-screen instructions to complete the installation.

5. When the installation is complete, close Windows and restart Windows
for the new driver to take effect.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies