PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP8437

SP8437 — ROMPaq for Deskpro 2000 (686M ROM)

SoftPaq Number SP8437
Filename sp8437.exe
Size 378K
Date March 8, 1999
Version 686M_121098
Operating System All
Products Affected Deskpro 2000 models 6233MMX, 6266MMX, and 6300MMX with a 686M Family ROM NOTE: Run F10 Setup to determine the ROM Family and ROM date.
Supersedes SP7896

  Download sp8437.exe  


Readme

SOFTPAQ NUMBER:  SP8437
PART NUMBER:  270894-006
FILE NAME:  N/A
TITLE:  ROMPaq for Deskpro 2000 (686M ROM)
VERSION:  686M_121098
LANGUAGE:  English

CATEGORY:  ROMPaqs 

DIVISIONS:  Desktops

PRODUCTS AFFECTED:  Deskpro 2000 models 6233MMX, 6266MMX, and 6300MMX
                    with a 686M Family ROM 
             NOTE:  Run F10 Setup to determine the ROM Family and ROM date.

OPERATING SYSTEM:  N/A 

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  March 8, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP7896

DESCRIPTION:  This creates a ROMPaq firmware upgrade diskette to 
upgrade the System ROM to the 12/10/98 version in Deskpro 2000 models 
with a 686M Family ROM.  The ROM Family and ROM date can be determined 
by running F10 Setup.  

Enhancements/Fixes in this version:

 - Fixes an issue where the CD-ROM drive would not boot a bootable CD.
 - Fixes an issue during NT installation that caused a lockup when an 
   Ultra-Wide SCSI driver was specified in the diskette drive.
 - Adds support for improved VGA performance by caching the option ROM.
 - Now supports a warm boot with client32 for DOS.

HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskette in a drive to create the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5. Keeping the newly created diskette in the A: drive, cycle 
system power to boot from the ROMPaq diskette.

6. Follow the on-screen instructions to select the 12/10/98 
Compaq System ROM and upgrade the firmware.

Copyright 1998,1999 Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home