| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP8177 — Armada 6500 Series Touchpad Driver for DOS/Windows
| SoftPaq Number |
SP8177 |
| Filename |
sp8177.exe |
| Size |
260K |
| Date |
September 9, 1998 |
| Version |
3.01 |
| Operating System |
DOS, Windows 3.1, Windows WfW 3.11 |
| Products Affected |
Compaq Armada 6500 Series |
Readme
SOFTPAQ NUMBER: SP8177
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Armada 6500 Series Touchpad Driver for DOS/Windows
VERSION: 3.01
LANGUAGE: US English
CATEGORY: Drivers
DIVISIONS: Portables
PRODUCTS AFFECTED: Compaq Armada 6500 Series
OPERATING SYSTEM: Microsoft DOS,
Microsoft Windows 3.1 (not tested by Compaq),
Microsoft Windows for Workgroups 3.11
SYSTEM CONFIGURATION: N/A
PREREQUISITES: N/A
EFFECTIVE DATE: September 9, 1998
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 3.1
SUPERSEDES: N/A
DESCRIPTION: Unpacks the files needed to install a touchpad driver
for DOS, Windows 3.1, and Windows for Workgroups in Armada 6500 Series
notebooks.
NOTE: Compaq testing was performed using Windows for Workgroups,
Version 3.11. Although this driver should work with Windows 3.1, Compaq
did not qualify it in that environment.
The Synaptics TouchPad Control Panel allows you to customize the
features of the TouchPad as well as the controls of a regular mouse.
Optionally, an installation diskette can be created.
HOW TO USE:
1. Download the SoftPaq to a temporary, empty directory on your
hard drive. The file downloaded is a self-extracting executable
with a filename based on the SoftPaq Number above.
2. Execute the downloaded file and follow the on-screen instructions.
Enter "Y" to confirm the unpacking of files into the download directory.
3. After the files have been unpacked, you may delete the self-extracting
file downloaded in step 1.
4. The driver may be installed directly from the files on the
download directory or a diskette can be created.
To create a set of diskettes, run MAKEDISK.BAT.
For installation instructions, refer to the README.TXT file in the expanded
SYNTOUCH\DISK1 directory.
5. After the driver has been installed, you may delete the files
from the download directory if you wish.
Copyright 1998, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|