SOFTPAQ NUMBER: SP8036
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Support Software for Microsoft Windows NT 4.0
	(Files rather than diskettes)
VERSION:  2.09 Rev A
LANGUAGE:  Japanese

CATEGORY:  Drivers

DIVISIONS:  Systems
	    Workstations

PRODUCTS AFFECTED:  Compaq ProLiant, ProSignia and SystemPro Servers;
                    Compaq Professional Workstations

OPERATING SYSTEM:  Microsoft Windows NT 4.0 (Japanese)

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  August 5, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP7667

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode.  This SoftPaq creates two files -- a description 
file and a large self-extracting executable file.  The self-extracting 
executable file contains Compaq Support Software for Microsoft Windows 
NT 4.0 that supports the following subsystems and features of Compaq 
Professional Workstations and ProLiant and ProSignia Servers.

   Adaptec AIC-78xx PCI SCSI Controller
   ATI Rage IIC Graphics Controller
   Compaq ATAPI/IDE Controller
   Compaq Cluster Verification Utility
   Compaq Ethernet or Fast Ethernet Network Interface Controllers
        Compaq Fast Ethernet Embedded NIC NC3121
        Compaq Fast Ethernet NIC NC3120
        Compaq Fast Ethernet NIC NC3121
   Compaq Fibre Channel Storage System
   Compaq Fibre Channel Filter Driver
   Compaq 4/8-GB SLR Tape Driver
   Compaq Integrated Management Display Utility
   Compaq Integrated Management Log Viewer
   Compaq Netelligent Family of Controllers
	Compaq Netelligent 10 T/2 PCI UTP/Coax Controller
	Compaq Netelligent 10 T ISA UTP Controller      
	Compaq Netelligent 10 T/2 ISA UTP/Coax Controller
	Compaq Netelligent 10 T PCI UTP Controller
	Compaq Netelligent 10/100 TX PCI UTP Controller
	Compaq Netelligent Dual 10/100 TX PCI UTP Controller    
   Compaq NetFlex-3 Network Adapter Family
	Compaq NetFlex-3/P Controller   
	Compaq NetFlex-3/E Controller   
   Compaq NetFlex-3 network adapter monitoring, configuration and duplex
        utility
   Compaq Online Storage Controller Recovery Utility   
   Compaq PCI Hot Plug Utility
   Compaq Power Down Manager
   Compaq Power Supply Viewer
   Compaq ProLiant Storage System 
   Compaq Recovery Server, Standby Agent with SMART-2 Support
   Compaq Recovery Server, Online Agent with SMART-2 Support
   Compaq Remote Insight Board Driver
   Compaq Remote Insight Board WAN Driver
   Compaq Remote Monitor Service
   Compaq SCSI Controllers
	Compaq Dual Channel Wide-Ultra SCSI-3 Controller        
	Compaq Wide-Ultra SCSI-3 Controller
	Compaq 32-Bit Fast-Wide SCSI-2/E Controller
	Compaq 32-Bit Fast-SCSI-2 Controller
	Integrated 32-Bit Fast-SCSI-2/P Controller      
	Integrated 32-Bit Fast-Wide SCSI-2/P Controller
	Integrated Wide-Ultra SCSI Controller
	Compaq 32-Bit Fast-SCSI-2 Controller option board       
	Compaq 32-Bit Fast-Wide SCSI-2/P Controller option board
	Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board        
	Compaq Wide-Ultra SCSI-3 Controller option board  
   Compaq Smart/Smart-2 Family of Array Controllers
	Compaq Smart/IDA-2/IDA/IAES Controllers
	Compaq Smart-2/P and Compaq Smart-2/E Controllers
	Compaq Smart-2DH Controller
	Compaq Smart-2SL Controller
        Compaq Smart 3100ES Controller
   Compaq Support Software Installation Utility
   Compaq System Management/Health Driver   
   Diamond Multimedia Fire GL 4000 Graphics Controller
   ELSA Gloria-L 3D Graphics Controller
   ELSA Gloria-Synergy 3D Graphics Controller
   ELSA Gloria-Synergy+ 3D Graphics Controller
   ELSA Gloria-XL 3D Graphics Controller
   ESS AudioDrive Audio Controller
   Matrox Millennium/Millennium II Graphics Controller
   3MODE Floppy Driver

Enhancements/Fixes:

The release of the Compaq Support Software for Microsoft Windows
NT 4.0, Version 2.09 Revision A, primarily supports a new ELSA 
GLoria-Synergy/Synergy + 3D Graphics Controller driver.

Compaq Support Software Setup for Microsoft Windows NT(SETUP.EXE)
 	Replaced the OEMSETUP.INF file with the CPQATAPI.INF 
        file for the Compaq ATAPI/IDE Controller.
 	Added Compaq Support Software Setup support for the Compaq
        ATAPI/IDE Controller.

Compaq System Management Driver(SYSMGMT.SYS)
 	Updated the Compaq System Management driver version from 
	3.06.01 to 3.09.01.

ELSA GLoria-Synergy/Synergy + 3D Graphics Controller(EGLPM.SYS)
 	Added support for the new ELSA GLoria-Synergy/Synergy + 
	3D Graphics Controller driver Version 5.33.00.310.2.  
	This new driver includes OpenGL Version 2.01.13.072, 
	Dual Monitor Support, and updated tools.  It also 
	corrects single screen start-up and 3D Studio Max R2 
	application issues.

For details, refer to NTREADME.HLP in the created support files.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       NTSSD.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       NTSSD.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.