SOFTPAQ NUMBER:  SP7993
PART NUMBER:  N/A
FILE NAME:  686T2.CAB
TITLE:  ROM Image for Deskpro EP/SB Series Remote ROM Flash (686T2 ROM)
VERSION:  686T2_072498 
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Desktops

PRODUCTS AFFECTED:  Compaq Deskpro EP and SB Series models 6350, 6400,
                    and 6450 with a 686T2 Family ROM
             NOTE:  Run F10 Setup to determine the ROM Family and ROM date.

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  August 18, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.X

SUPERSEDES:  SP6910

PREREQUISITE:  Remote Management Setup

DESCRIPTION:  Creates cabinet files that contain a binary image for the 07/24/98
version System ROM and Language Module options for Deskpro EP Series and SB Series 
models with a 686T2 Family ROM.  The ROM Family and ROM date can be determined by 
running F10 Setup.  

This ROM includes a ROM-based F10 Setup.  A Language Module option allows the user to 
select the language used in F10 Setup:  Danish, Dutch, English, Finnish, French, German, 
Italian, Norwegian, Portuguese, Spanish, or Swedish.  

This ROM version is recommended for use with Windows 98.

Enhancements/Fixes:

 - Adds support for Windows 98 ACPI (Advanced Configuration and Power Interface).
   ACPI enables a PC to turn its peripherals on and off for improved power management.
 - Adds support for Intel Pentium II 450-MHz processor.
 - Adds support for USB (Universal Serial Bus) hub and keyboard in a DOS environment.
 - Adds support to "hot plug" USB devices at the back of the computer.
 - Fixes Windows NT install problem that causes the system to lock up.
 - Fixes a problem with USB camera recognition.
 - Fixes a problem with device security in ACPI for UART (Universal Asynchronous 
   Receiver Transmitter) serial ports and parallel ports.
 - Fixes a problem when Power Management timer was set to greater than 120 minutes.
 - Fixes a problem that would occasionally lock up the computer if a network 
   controller was installed in a system with an AGP (Accelerated Graphics Port) video 
   controller.
 - Fixes an IRQ problem with the controllerless modem.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
This creates the file 686T2.CAB.

3. After the file has been created, you may delete the  
self-extracting file downloaded in step 1.

4. Refer to the Remote Management Setup documentation for 
instructions on creating a Remote ROM Flash job to flash the ROM 
on target PCs on the network.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.