SOFTPAQ NUMBER:  SP7849
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Armada Specific Models S3 M5 Video Driver for Windows NT 4.0 
VERSION:  3.25.20 Rev. C
LANGUAGE:  Norwegian

CATEGORY:  Drivers

DIVISIONS:  Portables

PRODUCTS AFFECTED:  Compaq Armada 7400 6266/T/4000/D/0/1
		    Compaq Armada 7400 6266/T/4000/D/0/3
		    Compaq Armada 7400 6300/T/6000/D/M/1
		    Compaq Armada 7400 6300/T/6000/D/0/1
		    Compaq Armada 7400 6300/T/6000/D/0/3
		    Compaq Armada 7800 6266/T/5000/D/M/1
		    Compaq Armada 7800 6266/T/5000/D/0/1
		    Compaq Armada 7800 6266/T/5000/D/0/3
		    Compaq Armada 7800 6266/T/8000/D/M/1
		    Compaq Armada 7800 6266/T/8000/D/0/1
		    Compaq Armada 7800 6266/T/8000/D/0/3
		    Compaq Armada 7800 6300/T/8000/V/M/1
		    Compaq Armada 7800 6300/T/8000/V/0/1
		    Compaq Armada 7800 6300/T/8000/V/0/3
		    Compaq Armada 7400 6333/T/6.4/D/M/1
		    Compaq Armada 7400 6333/T/6.4/D/0/1
		    Compaq Armada 7400 6333/T/6.4/D/M/3
		    Compaq Armada 7400 6333/T/6.4/D/0/3
		    Compaq Armada 7400 6366/T/10.0/V/M/1
		    Compaq Armada 7400 6366/T/10.0/V/M/3
		    Compaq Armada 7800 6366/T/14.0/V/M/1
		    Compaq Armada 7800 6366/T/14.0/V/0/1
		    Compaq Armada 7800 6366/T/14.0/V/M/3
		    Compaq Armada 7800 6366/T/14.0/V/0/3

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE: 18 Aug 1998

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: 3.1

SUPERSEDES: SP6683

DESCRIPTION: Unpacks the files needed to install the Armada Specific
Models S3 M5 Video Driver for Windows NT 4.0 for the models listed
above in PRODUCTS AFFECTED.  Optionally creates an installation diskette.

This version is the initial release of this utility for the
Armada 7400 models listed above.

Enhancements/Fixes:

- Fix in Display Utility to correctly indicate video playback mode.

- Corrected problem with mouse cursor disappearing after going to 
  Full Screen DOS and Exiting DOS.

- Corrected problem with system boot to SW mouse instead of HW mouse.

- Corrected Hotkey Fn+F4 not operating properly in DOS full-screen.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

To create the 1 optional installation diskette, run MAKEDISK.BAT and 
follow on-screen instructions.

3. After the directory has been created, you may delete the  
self-extracting file downloaded in step 1.

4. To install from diskette, follow the steps in the README.TXT file.
To install from the download directory, follow the steps in the README.TXT
file.  However, for the location of the installation software, specify
the complete path to the unpacked files from step 2 above.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

Copyright 1998, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies