SOFTPAQ NUMBER:  SP7812
PART NUMBER: N/A
FILE NAME:  N/A
TITLE:  Armada Specific Models PC Card Support for Windows NT 4.0 
VERSION:  2.11.006
LANGUAGE:  Finnish

CATEGORY:  Drivers

DIVISIONS:  Portables

PRODUCTS AFFECTED:  Compaq Armada 7400 6266/T/4000/D/0/1
		    Compaq Armada 7400 6266/T/4000/D/0/3
		    Compaq Armada 7400 6300/T/6000/D/M/1
		    Compaq Armada 7400 6300/T/6000/D/0/1
		    Compaq Armada 7400 6300/T/6000/D/0/3
		    Compaq Armada 7800 6266/T/5000/D/M/1
		    Compaq Armada 7800 6266/T/5000/D/0/1
		    Compaq Armada 7800 6266/T/5000/D/0/3
		    Compaq Armada 7800 6266/T/8000/D/M/1
		    Compaq Armada 7800 6266/T/8000/D/0/1
		    Compaq Armada 7800 6266/T/8000/D/0/3
		    Compaq Armada 7800 6300/T/8000/V/M/1
		    Compaq Armada 7800 6300/T/8000/V/0/1
		    Compaq Armada 7800 6300/T/8000/V/0/3

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  PCMCIA slots; see PREREQUISITES

PREREQUISITES:  Power Management for Windows NT 4.0 (like SP7868)

EFFECTIVE DATE: 10 August 1998

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: 3.1

SUPERSEDES: SP6659 for Armada 7800 series

DESCRIPTION: Unpacks files needed to install Compaq PC Card Support
(Cardware) for Windows NT 4.0 for the Armada models listed in the
PRODUCTS AFFECTED section.  Optionally creates three installation 
diskettes.
 
Enhancements/Fixes:

- User interface re-positioned for docked/undocked configurations.

- Fixes included in order to allow operation of Adaptec 1480 (CB) card.

- Added code to correctly identify the Armada 7400 series.


HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

To create the 3 optional installation diskettes, run MAKEDISK.BAT and 
follow on-screen instructions.

3. After the directory has been created, you may delete the  
self-extracting file downloaded in step 1.

4. To install from diskette, follow the steps in the README.TXT file.
To install from the download directory, follow the steps in the README.TXT
file.  However, for the location of the installation software, specify
the directory path of the files unpacked in step 2 above.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

Copyright 1998, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies