PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP7767

SP7767 — Armada 6500 DOS Diagnostics for Windows (Japanese)

SoftPaq Number SP7767
Filename sp7767.exe
Size 2069K
Date March 18, 1999
Version 10.32 Rev B
Operating System Windows 95, Windows 98
Products Affected Compaq Armada 6500 Series

  Download sp7767.exe  


Readme

SOFTPAQ NUMBER:  SP7767
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Armada 6500 DOS Diagnostics for Windows (Japanese)
VERSION:  10.32 Rev B 
LANGUAGE:  Japanese

CATEGORY:  Diagnostics

DIVISIONS:  Portables

PRODUCTS AFFECTED:  Compaq Armada 6500 Series

OPERATING SYSTEM:  Microsoft Windows 95,
                   Microsoft Windows 98

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  Armada 6500 System ROM Version 1.29 (or greater)
                NOTE: Version 1.29 is available in SoftPaq SP8210.

EFFECTIVE DATE:  March 18, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  N/A

DESCRIPTION:  Unpacks the files needed to create two installation 
diskettes for the Japanese language Compaq DOS Diagnostics for Windows 
Utility for Armada 6500 notebooks. 

PC Diagnostics is preinstalled on the Diagnostics Partition of all 
supported systems with the exception of the Armada 6500 family.  
PC Diagnostics is only supported via diskette on Armada 6500.  The 
diskette created by this SoftPaq can be used to update this utility 
on the Diagnostics Partition or to restore it if the Diagnostics 
Partition has been destroyed.  PC Diagnostics can be run by pressing 
F10 when the cursor moves to the upper right corner of the screen 
during power-up or reboot.  Or it can be run directly from this 
diskette, which is required for use on the Armada 6500. 

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Enter "Y" to confirm the unpacking of files into the download directory. 

3. After the files have been unpacked, you may delete the self-extracting 
file downloaded in step 1.

4. To create the diagnostics diskettes, run the dos_diag.jpn\MAKEDIAG.BAT file.
Follow the instructions on the screen.  You will need 2 blank formatted diskettes.

5. After the diagnostics have been installed from the diskettes, you may delete 
the files from the download directory if you wish.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home