SOFTPAQ NUMBER: SP7059
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Support Software for Microsoft Windows NT 4.0
        (Workstations)
VERSION:  2.08 Rev A
LANGUAGE:  Japanese

CATEGORY:  Drivers

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstations

OPERATING SYSTEM:  Microsoft Windows NT 4.0 (Japanese)

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  July 13, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP7059

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode.  This SoftPaq creates two files -- a description
file and a self-extracting executable file.  The self-extracting executable 
file contains Compaq Support Software for Microsoft Windows NT 4.0 
that supports the following subsystems and features of 
Compaq Professional Workstations:
 
   System Management/Health driver 
   Netelligent Family of Controllers
   	Compaq Netelligent 10 T/2 PCI UTP/Coax Controller
    	Compaq Netelligent 10 T ISA UTP Controller	
    	Compaq Netelligent 10 T/2 ISA UTP/Coax Controller
    	Compaq Netelligent 10 T PCI UTP Controller
    	Compaq Netelligent 10/100 TX PCI UTP Controller
    	Compaq Netelligent Dual 10/100 TX PCI UTP Controller	
   NetFlex-3 Network Adapter Family
    	Compaq NetFlex-3/P Controller	
    	Compaq NetFlex-3/E Controller	
   NetFlex-3 network adapter monitoring, configuration and duplex utility
   Compaq 10/100 TX Embedded Intel WOL UTP Controller
   Compaq 10/100 TX PCI Intel UTP Controller
   SMART Family of Array Controllers
	Compaq SMART/IDA-2/IDA/IAES Controllers
	Compaq SMART-2/P and Compaq SMART-2/E Controllers
	Compaq SMART-2DH Controller
	Compaq SMART-2SL Controller
   Compaq SCSI Controllers
	Compaq Dual Channel Wide-Ultra SCSI-3 Controller	
        Compaq Wide-Ultra SCSI-3 Controller
        Compaq 32-Bit Fast-Wide SCSI-2/E Controller
      	Compaq 32-Bit Fast-SCSI-2 Controller
    	Integrated 32-Bit Fast-SCSI-2/P Controller	
    	Integrated 32-Bit Fast-Wide SCSI-2/P Controller
    	Integrated Wide-Ultra SCSI Controller
    	Compaq 32-Bit Fast-SCSI-2 Controller option board	
    	Compaq 32-Bit Fast-Wide SCSI-2/P Controller option board
	Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board    	
	Compaq Wide-Ultra SCSI-3 Controller option board   
   Diamond Multimedia Fire GL 4000 Graphics Controller
   ELSA Gloria-L 3D Graphics Controller
   ELSA Gloria-Synergy 3D Graphics Controller
   ELSA Gloria-Synergy+ 3D Graphics Controller
   ELSA Gloria-XL 3D Graphics Controller
   ESS AudioDrive Audio Controller
   Matrox Millennium/Millennium II Graphics Controller
   Compaq Support Software Installation utility
   3MODE Floppy Driver

Enhancements/Fixes:

The release of the Compaq Support Software for Microsoft Windows NT
4.0, Version 2.08 Revision A, primarily supports the following new 
products: the Compaq ProLiant 1850R, the Compaq ProLiant 6000 400-512K
Model 1-128, the Compaq ProLiant 6000 400-1024K Model 2S-256, the 
Compaq ProLiant 7000 400-1024K Model 1S-256, and the Compaq 
Professional Workstation AP200.  

Adaptec AIC-78xx PCI SCSI Controller(AIC78XX.SYS)
	Added support for the new Adaptec AIC-78xx PCI SCSI Controller
        driver, which is only supported on the Compaq Professional 
	Workstation AP200.  For more information on this driver, refer
	to the section entitled Adaptec AIC-78xx PCI SCSI Controller. 

ATI RAGE IIC Graphics Controller(ATI.SYS)
	Added support for the new ATI RAGE IIC Graphics Controller 
	driver.  The Compaq Professional Workstations and/or Compaq 
	Servers that may use this driver are indicated in the section 
	entitled Video Support for Compaq Professional Workstations 
	and Compaq Servers.

Compaq ATAPI/IDE Controller(CPQATAPI.SYS)
	Added support for the new Compaq ATAPI/IDE Controller driver 
	version 2.21.1, which is only supported on the Compaq 
	Professional Workstation AP200.  For more information about 
	this driver, refer to the section entitled Compaq ATAPI/IDE 
	Controller.

Compaq Ethernet or Fast Ethernet Network Interface Controller Drivers
        (N100NT.SYS)
	Added support for Compaq Fast Ethernet NIC NC3120.  For more 
        information on this controller, refer to the section entitled 
	Compaq Ethernet or Fast Ethernet Network Interface Controllers.

Compaq Netelligent/NetFlex-3 Controller(NETFLX3.SYS)
	Updated the Compaq Netelligent/NetFlex-3 Controller driver 
	from Version 4.25 to 4.26 to support the Compaq ProLiant 6000 
	400-512K Model 1-128, the Compaq ProLiant 6000 400-1024K 
	Model 2S-256, and the Compaq ProLiant 7000 400-1024K Model 
	1S-256.

Compaq System Management Driver(SYSMGMT.SYS)
	Updated the Compaq System Management driver version from 
	3.03.01 to 3.06.01.
	Added support for the following new Compaq servers and 
	workstation:  
	Compaq ProLiant 1850R, Compaq ProLiant 6000 400-512K Model 
	1-128, Compaq ProLiant 6000 400-1024K Model 2S-256, Compaq 
	ProLiant 7000 400-1024K Model 1S-256, and Compaq Professional 
	Workstation AP200.
	Added support for logging Non-Maskable Interrupt (NMI) and 
	Windows	NT bugcheck data to the Windows NT Event Viewer.
	Corrected a problem on the Compaq ProLiant 800 and the Compaq
	ProLiant 1600 in which the system would not shut down after 
	the processor fan failed if thermal shutdowns were disabled.  
	This setting can be viewed and set through the Compaq System 
	Configuration Utility as Compaq	Automatic Server Recovery (ASR): 
	Thermal shutdown and through the Compaq Insight Manager as 
	Recovery: Environment: Degraded action.
	Corrected a problem on the Compaq ProLiant 800 and the Compaq 
	ProLiant 1600 in which the thermal shutdown setting described 
	above would be set to disabled after a thermal shutdown began.   
	A thermal shutdown is performed after a fan failure or an 
	over-temperature condition.

For details, refer to NTREADME.HLP in the created support files.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       WKST.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       WKST.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.