PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP7491

SP7491 — Presario Fix for Windows 95 NTKERN Error with 64 MB RAM

SoftPaq Number SP7491
Filename SP7491.EXE
Size 298K
Date June 12, 1998
Version 1.00 Rev A
Operating System Windows 95
Products Affected Compaq Presario desktops and notebooks with Windows 95 and EXACTLY 64 MB of memory (RAM)

  Download SP7491.EXE  


Readme

SOFTPAQ NUMBER:  SP7491
PART NUMBER:  277144-001
FILE NAME:  INIEDIT.EXE
TITLE:  Presario Fix for Windows 95 NTKERN Error with 64 MB RAM
VERSION:  1.00 Rev A
LANGUAGE:  English

CATEGORY:  Fix

DIVISIONS:  Consumer

PRODUCTS AFFECTED:  Compaq Presario desktops and notebooks with 
                    Windows 95 and EXACTLY 64 MB of memory (RAM)

OPERATING SYSTEM:  Microsoft Windows 95 OSR1 or OSR2

SYSTEM CONFIGURATION:  Exactly 64 MB RAM installed

PREREQUISITES:  N/A

EFFECTIVE DATE:  June 12, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  N/A

DESCRIPTION:  Creates a bootable diskette with an update that prevents a 
potential memory conflict in Microsoft Windows 95 that can cause Presario 
computers with exactly 64 MB of RAM to lock up due to a Windows 95 protection 
error in NTKERN during system start-up.  This problem is more likely to occur 
on faster processors and may not occur on slower processors.

If you are experiencing this problem, apply this update.

The update limits the amount of hard disk cache used by Windows 95 by 
setting MaxFileCache=6000 in the [vcache] section of SYSTEM.INI.  

HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskette in a drive to create the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5. To install, put the diskette into the A: drive and restart the system, 
allowing it to boot from the diskette.  Follow on-screen instructions.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home