PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP7111

SP7111 — Deskpro EP/SB/EN Series Drivers for Compaq 10/100 TX PCI Intel UTP Controller and NC3121 Fast Ethernet NIC

SoftPaq Number SP7111
Filename SP7111.EXE
Size 890K
Date June 30, 1998
Version 1.56 Rev A
Operating System Windows 95, Windows 98, Microsoft Windows NT, DOS, Microsoft Windows for Workgroups, OS/2
Products Affected Deskpro EP Series, Deskpro SB Series, Deskpro EN Series
Supersedes SP5729

  Download SP7111.EXE  


Readme

SOFTPAQ NUMBER:  SP7111
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Deskpro EP/SB/EN Series Drivers for Compaq 10/100 TX PCI Intel 
        UTP Controller and NC3121 Fast Ethernet NIC 
VERSION:  1.56 Rev A 
LANGUAGE:  US English

CATEGORY:  Drivers

DIVISION:  Desktops

PRODUCTS AFFECTED:  Deskpro EP Series, Deskpro SB Series,
                    Deskpro EN Series

OPERATING SYSTEM:  Microsoft Windows 95, 
                   Microsoft Windows 98, 
                   Microsoft Windows NT, 
                   MS-DOS,
                   Microsoft Windows for Workgroups,
                   IBM OS/2
                   Netware

SYSTEM CONFIGURATION:  Compaq 10/100 TX PCI Embedded Intel UTP Controller,
                       or NC3121 Fast Ethernet NIC installed

EFFECTIVE DATE:  June 30, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  SP5729

DESCRIPTION:  Unpacks files needed to install the drivers for the 
Compaq 10/100 TX PCI Embedded Intel UTP Controller and NC3121 Fast 
Ethernet NIC for the Deskpro EP, SB, and EN Series.  
These drivers allow the network adapter to function in various network 
environments. 
 
An optional installation diskette can be created from the unpacked files.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

To create the optional installation diskette, run MAKEDISK.BAT and
follow on-screen instructions.

3. After the directory has been created, you may delete the  
self-extracting file downloaded in step 1.

4. For information on driver files provided, refer to the information 
in the file <download path>\INTEL\DISK1\FILES.TXT.  

NOTE: The README.BAT file can only be run from the optional installation
      diskette.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home