SOFTPAQ NUMBER:  SP7099
PART NUMBER:  277271-001
FILE NAME:   N/A
TITLE:  Deskpro OS/2 Video Driver for Matrox Controllers
VERSION:  2.21.063 Rev A
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS:  Desktops

PRODUCTS AFFECTED:  Deskpro Series with the Matrox Millennium, Performance,  
Millennium II, G100, or G200  Graphics Controller, including:
  Deskpro EN Series, Deskpro EP Series, Deskpro 2000 5133, Deskpro 2000 6200, 
  Deskpro 5120, Deskpro 5133, Deskpro 5150, Deskpro 5166, 
  Deskpro 6000 5166, Deskpro 6000 5200, Deskpro 6000 6180, Deskpro 6000 6200, 
  Deskpro XL 5100, Deskpro XL 5120, Deskpro XL 5133, Deskpro XL 590, 
  Deskpro XL 6150, Deskpro XL 6200, ProLinea 5133, ProLinea 5150, ProLinea 5166

NOTE:  To determine whether your unit has a video controller supported by this 
       driver, go to the OS/2 System, click on System Setup and then Display 
       Driver Install.  Verify that one of the supported Matrox Controllers 
       appears next to the Primary Display check box. 

OPERATING SYSTEM:  IBM OS/2 2.1, 3.0, or 4.0

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  November 5, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.x

SUPERSEDES:  SP4160

DESCRIPTION:  This SoftPaq unpacks the files required to install 
the video drivers for IBM OS/2 for the Matrox Millennium, Performance
Millennium II, G100, and G200 Graphics Controllers used in the Deskpro 
models mentioned above.  
It optionally allows a driver diskette to be created.

HOW TO USE:

1. Download the SoftPaq to a temporary, EMPTY directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into the download 
directory or the directory specified.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. The driver may be installed directly from the files on the download 
directory or driver diskette can be created.  
To create a driver diskette, run MAKEDISK.BAT.
To install the driver, open an OS/2 full-screen or OS/2 window session.
At the OS/2 command prompt, type in the path to INSTALL.CMD in the download 
directory and press ENTER:
   c:\<path>\install
Follow on-screen instructions and select VGA mode.
Or if installing from a created diskette, enter:
   a:\install

5. When the installation is complete, shut down and restart the computer for 
the changes to take effect.

6. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies