SOFTPAQ NUMBER: SP7097
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Deskpro Windows NT 3.51 Video Driver for Matrox 
VERSION:  2.35.081 Rev A
LANGUAGE:  English 

CATEGORY:  Drivers

DIVISION:  Desktops

PRODUCTS AFFECTED:  
Compaq Deskpro and Prolinea models with a Matrox Millennium, Performance, 
Millennium II, G100, or G200 Graphics Controller, including: 
Deskpro EN & EP Series, Deskpro 2000 5133, 
Deskpro 2000 6200, Deskpro 5120, Deskpro 5133, Deskpro 5150, 
Deskpro 5166, Deskpro 6000 5166, Deskpro 6000 5200, Deskpro 6000 6180, 
Deskpro 6000 6200, Deskpro XL 5100, Deskpro XL 5120, Deskpro XL 5133, 
Deskpro XL 590, Deskpro XL 6150, Deskpro XL 6200, ProLinea 5133, 
ProLinea 5150, and the ProLinea 5166.

NOTE:  To determine whether your unit has a video controller
       supported by this driver, go to the Control Panel and 
       select Display/Settings/Display Type.  

OPERATING SYSTEM:  Microsoft Windows NT 3.51

SYSTEM CONFIGURATION:  N/A	

PREREQUISITES:  N/A

EFFECTIVE DATE:  August 24, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.x

SUPERSEDES:  SP4159

DESCRIPTION:  Unpacks the files needed to install Windows NT 3.51 video
drivers for Compaq Deskpro and Prolinea models with a Matrox Millennium, 
Performance, or Millennium II, G100, or G200 Graphics Controller.  
Optionally allows a driver diskette to be created.

Enhancements/Fixes:
 - Adds support for the Matrox G100 and G200 Graphics Controllers

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the  
self-extracting file downloaded in step 1.

4. The driver may be installed directly from the files on the download 
directory or a driver diskette can be created.  
To create a driver diskette, run MAKEDISK.BAT.
To install the driver, 
- Open the Control Panel and select the Display icon. 
- Select Settings, then Display Type. 
- In the Display Type dialog box, press the 'Change...' button. 
- In the Select Device dialog box, press the 'Other...' button. 
- In the Install From Disk dialog box, type the location of the 
  Matrox Millennium installation files (e.g. "A:\" or C:\path) 
- From the displayed list, select a resolution and pixel depth 
  supported by your card and monitor, then select 'Install'.
- Follow the on-screen instructions to complete the installation.

5. When the installation is complete, close Windows and restart Windows
for the new driver to take effect.

6. After a successful installation, you may delete the temporary
directory created in step 2.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies