SOFTPAQ NUMBER:  SP7073
PART NUMBER:  276571-002
FILE NAME:  N/A
TITLE:  Workstation GLoria-Synergy (PCI)/ Synergy+ (AGP) Drivers for Windows 95/98 
VERSION:  4.10 Rev B
VENDOR VERSION NUMBER:  4.10.01.0202-0013
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstation 5100, or 6000 using the 
                    GLoria-Synergy 3D Graphics Controller (PCI);
                    Compaq Professional Workstation AP400 using the 
                    GLoria-Synergy+ 3D Graphics Controller (AGP)
NOTE:  The GLoria-Synergy and Synergy+ 3D Graphics Controllers are standard 
equipment on selected Workstation models only, but could be an option 
installed on other models.  

OPERATING SYSTEM:  Microsoft Windows 95,
                   Microsoft Windows 98

SYSTEM CONFIGURATION:  GLoria-Synergy 3D Graphics Controller (PCI), or
                       GLoria-Synergy+ 3D Graphics Controller (AGP)

PREREQUISITES:  N/A

EFFECTIVE DATE:  June 8, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  N/A

DESCRIPTION:  Creates the 1-diskette set, "Workstation GLoria-Synergy/Synergy+ 
Drivers for Windows 95/98."  The GLoria-Synergy Controller uses the PCI bus.  The 
GLoria-Synergy+ Controller uses the Accelerated Graphics Port (AGP) bus.

Enhancements/Fixes:
 - Adds support for 3Dlabs Permedia 2 processor for integrated 2D and 3D rendering 
   requirements.
 - Fixes Resume after ECO-Key Suspend.  When a windowed DOS box was opened, after 
   resume the refresh rate was changed.
 - Fixes problem where system locks up at startup in MDK with D3D update.
 - Fixes problem in MotorRacer with D3D update.
 - Fixes problem in Flight Simulator 98:  AGP-Mip-Map textures, errors in higher 
   resolutions.

HOW TO USE:

1.  Obtain 1 formatted 1.44-MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to that 
directory.  The file that is downloaded is an executable with a filename based 
on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file and follow the 
on-screen instructions.  You will be prompted to insert the formatted diskette 
in a drive to create the diskette.

4.  After the diskette has been created, you may delete the SoftPaq file 
downloaded in step 2.

5.  To Install, see section 3 in the file README.TXT on the created diskette.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks 
of their respective companies