SOFTPAQ NUMBER:  SP7028
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Support Software for Microsoft Windows NT 3.51
        (Files rather than diskettes)
VERSION:  1.28 Rev A
LANGUAGE:  Japanese

CATEGORY:  Drivers

DIVISIONS:  Systems
            Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstation 5000, 5100, 6000, and 8000;
                    Compaq ProSignia and ProLiant Servers

OPERATING SYSTEM:  Microsoft Windows NT 3.51

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  May 26, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP6930

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be 
run in United States mode.  This SoftPaq creates two files -- a description 
file and a large self-extracting executable file.  The self-extracting 
executable file contains Compaq Support Software for Microsoft Windows NT 3.51
that supports the following subsystems and features of Compaq Professional 
Workstations and ProLiant and ProSignia Servers.

   Compaq HAL Support (ISA, Uniprocessor, and Multiprocessor)
   Compaq Integrated Management Display Utility
   Compaq ProLiant Storage System and Compaq ProLiant Storage System/U
   Compaq Recovery Server, Standby Agent with SMART-2 Support
   Compaq Recovery Server, Online Agent with SMART-2 Support
   Compaq Remote Insight Board Driver
   Compaq Remote Insight Board WAN Driver
   Compaq Support Software Installation Utility
   Compaq System Management/Health Driver
   Netelligent Family of Controllers
   	Compaq Netelligent 10 T/2 PCI UTP/Coax Controller
    	Compaq Netelligent 10 T ISA UTP Controller	
    	Compaq Netelligent 10 T/2 ISA UTP/Coax Controller
    	Compaq Netelligent 10 T PCI UTP Controller
    	Compaq Netelligent 10/100 TX PCI UTP Controller
    	Compaq Netelligent Dual 10/100 TX PCI UTP Controller	
   NetFlex-3 Network Adapter Family
    	Compaq NetFlex-3/P Controller	
    	Compaq NetFlex-3/E Controller	
   NetFlex-3 network adapter monitoring, configuration and duplex utility
   SMART Family of Array Controllers
	Compaq SMART/IDA-2/IDA/IAES Controllers
	Compaq SMART-2/P and Compaq SMART-2/E Controllers
	Compaq SMART-2DH Controller
	Compaq SMART-2SL Controller
   32-Bit SCSI-2 Family of Controllers
	Compaq Dual Channel Wide-Ultra SCSI-3 Controller	
        Compaq Wide-Ultra SCSI-3 Controller
        Compaq 32-Bit Fast-Wide SCSI-2/E Controller
      	Fast-SCSI-2 Controller
    	Integrated 32-Bit Fast-SCSI-2/P Controller	
    	Integrated 32-Bit Fast-Wide SCSI-2/P Controller
    	Integrated Wide-Ultra SCSI Controller
    	Fast-SCSI-2 Controller option board	
    	Integrated 32-Bit Fast-Wide SCSI-2/P Controller option board
	Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board    	
	Compaq Wide-Ultra SCSI-3 Controller option board   
   Diamond Multimedia Fire GL 4000 Video Accelerator
   ELSA GLoria-L/GLoria-XL Video Controller
   ELSA GLoria-Synergy Video Controller
   ESS AudioDrive Audio Controller
   Matrox Millennium/Millennium II Video Controller
   3MODE Floppy Driver
 
Enhancements/Fixes:

For details, refer to NTREADME.HLP in the created support files.

The release of the Compaq Support Software for Microsoft Windows NT 3.51,
Version 1.28 A, primarily supports the updated Compaq System Management
Driver, the new Compaq ProLiant 1600 Models 6/350-1 and 6/400-1, the new 
Compaq ProLiant 1600R Model 6/400-1, and the new Compaq ProLiant 800 
Model 6/350-1.

Compaq Remote Insight Board Driver
  Updated the Compaq Remote Insight Board driver from version 1.23 to 1.24.  
  This updated driver eliminates potential problems with the previous version 
  of the driver that was writing past the length of the resource descriptor.

Compaq Remote Insight Board WAN Driver
  Modified the OEMSETUP.INF file to check the wins binding order and to verify 
  that the network and WAN cards are not out of order.  If the cards are out 
  of order, a warning message will appear.  

Compaq System Management Driver
  Updated the Compaq System Management driver version from 2.58.02 to 3.00.01.

  Added support for the Compaq ProLiant 1600 Models 6/350-1 and 6/400-1, the 
  Compaq ProLiant 1600R Model 6/400-1, and the Compaq ProLiant 800 Model
  6/350-1.

  Modified the behavior of the Automatic Server Recovery (ASR) after the
  system  encounters a Non-Maskable Interrupt (NMI).  In this case, ASR
  will reboot the system after one minute.  The ASR timeout value specified
  through the Compaq System Configuration Utility will not be changed, and
  ASR behavior is unchanged in all other cases.

  Corrected a problem in which the "time of last update" timestamp on entries 
  in the Compaq Integrated Management Log was not updated when the entry was 
  updated.  This timestamp is visible through the Compaq Integrated Management 
  Display and through the "update time" field of the Compaq Integrated
  Management Log Viewer.

  Corrected a problem on Compaq Professional Workstations in which the "Hours 
  in Service" value, which is visible through Compaq Insight Manager, was not 
  initialized properly. 

  Corrected the following intermittent problems with the Compaq Hot Plug 
  Redundant Power Supplies on the Compaq ProLiant 1200, the Compaq ProLiant 
  1600 Model 6/266-1, and the Compaq ProLiant 1600R Model 6/266-1: power
  supply failures were improperly reported as removals and power supply
  insertions were improperly reported as repairs.


HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       NTSSD.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       NTSSD.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.