| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP7026 — Workstation GLoria-Synergy/Synergy+ Drivers for Windows NT 3.51
| SoftPaq Number |
SP7026 |
| Filename |
SP7026.EXE |
| Size |
1715K |
| Date |
June 24, 1998 |
| Version |
4.32 Rev A VENDOR VERSION NUMBER: 4.32.00.248 |
| Operating System |
Windows NT 3.51 |
| Products Affected |
Compaq Professional Workstation 5100, or 6000 using the GLoria-Synergy 3D Graphics Controller (PCI); Compaq Professional Workstation AP400 using the GLoria-Synergy+ 3D Graphics Controller (AGP) NOTE: The GLoria-Synergy and Synergy+ 3D Graphics Controllers are standard equipment on selected Workstation models only, but could be optional equipment installed on other models. |
| Supersedes |
SP5746 |
Readme
SOFTPAQ NUMBER: SP7026
PART NUMBER: 277045-001, 277046-001
FILE NAME: N/A
TITLE: Workstation GLoria-Synergy/Synergy+ Drivers for Windows NT 3.51
VERSION: 4.32 Rev A
VENDOR VERSION NUMBER: 4.32.00.248
LANGUAGE: English
CATEGORY: Drivers
DIVISIONS: Workstations
PRODUCTS AFFECTED: Compaq Professional Workstation 5100, or 6000 using the
GLoria-Synergy 3D Graphics Controller (PCI);
Compaq Professional Workstation AP400 using the
GLoria-Synergy+ 3D Graphics Controller (AGP)
NOTE: The GLoria-Synergy and Synergy+ 3D Graphics Controllers are standard
equipment on selected Workstation models only, but could be optional
equipment installed on other models.
OPERATING SYSTEM: Microsoft Windows NT 3.51
SYSTEM CONFIGURATION: GLoria-Synergy 3D Graphics Controller, or
GLoria-Synergy+ 3D Graphics Controller
PREREQUISITES: N/A
EFFECTIVE DATE: June 24, 1998
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 2.X
SUPERSEDES: SP5746
DESCRIPTION: Creates the 2-diskette set, "Workstation GLoria-Synergy/Synergy+
Drivers for Windows NT 3.51" for affected Professional Workstation models (see
PRODUCTS AFFECTED above). The GLoria-Synergy Controller uses the PCI bus. The
GLoria-Synergy+ Controller uses the Accelerated Graphics Port (AGP) bus.
Enhancements/Fixes:
- Fixes test screen error.
- Supports single monitor.
HOW TO USE:
1. Obtain 2 formatted 1.44-MB diskettes.
2. Download the SoftPaq to a directory on your hard drive and change to that
directory. The file that is downloaded is an executable with a filename based
on the SoftPaq Number above.
3. From that drive and directory, execute the downloaded file and follow the
on-screen instructions. You will be prompted to insert the formatted diskettes
in a drive to create the diskettes.
4. After the diskettes have been created, you may delete the SoftPaq file
downloaded in step 2.
5. To Install, see section 2 in the file README.TXT on the second diskette.
Copyright 1998, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered trademarks
of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|