SOFTPAQ NUMBER:  SP6978
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Support Software for Microsoft Windows NT 4.0
        (Servers)
VERSION:  2.06 Rev A
LANGUAGE:  Japanese

CATEGORY:  Drivers

DIVISIONS: Systems

PRODUCTS AFFECTED:  Compaq ProLiant and ProSignia Servers

OPERATING SYSTEM:  Microsoft Windows NT 4.0(Japanese)

SYSTEM CONFIGURATION:  N/A

PREREQUISITES: N/A

EFFECTIVE DATE:  18 May 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP6856

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode.  This SoftPaq creates two files -- a description
file and a self-extracting executable file.  The self-extracting executable 
file contains Compaq Support Software for Microsoft Windows NT 4.0 
that supports the following subsystems and features of Compaq Servers:
 
   Compaq Fibre Channel Storage System
   Compaq Fibre Channel Filter Driver
   Compaq Integrated Management Display Utility 
   Compaq Integrated Management Log Viewer
   Compaq Online Storage Controller Recovery Utility   
   Compaq PCI Hot Plug Utility
   Compaq Power Down Manager
   Compaq Power Supply Viewer
   Compaq ProLiant Storage System 
   Compaq Recovery Server, Standby Agent with SMART-2 Support
   Compaq Recovery Server, Online Agent with SMART-2 Support
   Compaq Remote Insight Board Driver
   Compaq Remote Insight Board WAN Driver
   Compaq Remote Monitor Service
   Compaq Support Software Installation Utility
   Compaq System Management/Health Driver   
   Netelligent Family of Controllers
   	Compaq Netelligent 10 T/2 PCI UTP/Coax Controller
    	Compaq Netelligent 10 T ISA UTP Controller	
    	Compaq Netelligent 10 T/2 ISA UTP/Coax Controller
    	Compaq Netelligent 10 T PCI UTP Controller
    	Compaq Netelligent 10/100 TX PCI UTP Controller
    	Compaq Netelligent Dual 10/100 TX PCI UTP Controller	
   NetFlex-3 Network Adapter Family
    	Compaq NetFlex-3/P Controller	
    	Compaq NetFlex-3/E Controller	
   NetFlex-3 network adapter monitoring, configuration and duplex utility
   SMART Family of Array Controllers
	Compaq SMART/IDA-2/IDA/IAES Controllers
	Compaq SMART-2/P and Compaq SMART-2/E Controllers
	Compaq SMART-2DH Controller
	Compaq SMART-2SL Controller
   32-Bit SCSI-2 Family of Controllers
	Compaq Dual Channel Wide-Ultra SCSI-3 Controller	
        Compaq Wide-Ultra SCSI-3 Controller
        Compaq 32-Bit Fast-Wide SCSI-2/E Controller
      	Fast-SCSI-2 Controller
    	Integrated 32-Bit Fast-SCSI-2/P Controller	
    	Integrated 32-Bit Fast-Wide SCSI-2/P Controller
    	Integrated Wide-Ultra SCSI Controller
    	Fast-SCSI-2 Controller option board	
    	Integrated 32-Bit Fast-Wide SCSI-2/P Controller option board
	Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board    	
	Compaq Wide-Ultra SCSI-3 Controller option board   
 
Enhancements/Fixes:

For details, refer to NTREADME.HLP in the created support files.

The release of the Compaq Support Software for Microsoft Windows 
NT 4.0, Version 2.06 Revision A, primarily supports the new Compaq 
4/8 GB SLR Tape Driver, the new Compaq ProLiant 1600 Models 
6/350-1 and 6/400-1, the new Compaq ProLiant 1600R Model 6/400-1,
and the new Compaq ProLiant 800 Model 6/350-1.

Compaq Array Controller(CPQARRAY.SYS)
	Updated the Compaq Array Controller driver version from 3.21 
	to 3.22. This updated Compaq Array Controller driver will 
	now save the current cache configuration of the redundant 
	pair and set the cache configuration to 100% read when 
	initializing for Compaq Online Storage Controller Recovery 
	Option support. These enhancements to the Compaq Array 
	Controller driver allow a non-degraded condition to be 
	detected via Compaq Insight Manager and a read cache as 
	opposed to running with cache completely disabled during 
	recovery operation.

Compaq 4/8 GB SLR Tape Driver(TANDQIC.SYS)
	Added support for the new Compaq 4/8 GB SLR Tape Driver 
	that supports the Compaq 4/8 GB SLR Tape Drive.  This 
	driver is an OEM driver from Tandberg Data Inc.  For more 
	information on this new driver, refer to the section 
	entitled Compaq 4/8 GB SLR Tape Drive Support.

Compaq Integrated Management Display Utility(CPQLCD.EXE)
	Added the ability to run silently using command-line 
	arguments.  The utility	processes and writes its output 
	to a log file.  This ability is similar to console 
	application behavior except that there is no console output.

Compaq Integrated Management Log Viewer(CPQIMLV.EXE)
	Added the ability to run silently using command-line 
	arguments.  The utility	processes and writes its output 
	to a log file.  This ability is similar to console 
	application behavior except that there is no console output.

Compaq Power Down Manager(CPQPSW.EXE)
	Added the ability to run silently using command-line 
	arguments.  The utility	processes and writes its output 
	to a log file.  This ability is similar to console 
	application behavior except that there is no console output.

Compaq Power Supply Viewer(CPQPSP.EXE)
	Added the ability to run silently using command-line 
	arguments.  The utility	processes and writes its output 
	to a log file.  This ability is similar to console 
	application behavior except that there is no console output.

Compaq Remote Insight Board Driver(CPQRIB.SYS)
	Updated the Compaq Remote Insight Board driver from version 
	1.23 to 1.24.  This updated driver eliminates potential 
	problems with the previous version of the driver that was 
	writing past the length of the resource descriptor.

Compaq Remote Insight Board WAN Driver(RIBWAN.SYS)
	Modified the OEMSETUP.INF file to check the wins binding order 
	and to verify that the network and WAN cards are not out of 
	order.  If the cards are out of order, a warning message will 
	appear.  

Compaq Support Software Setup for Microsoft Windows NT(SETUP.EXE)
	Corrected a problem with installing remote components using 
	Express Setup.  If the remote machine was at the Ctrl + Alt + Del 
	login screen when an Express Setup was performed, the Compaq 
	System Tools option of the Start menu was not created.

	Corrected a problem with updating the Compaq Fibre Channel Array 
	Controllers SCSI Class driver when installing a new SSD over 
	an existing one by implementing a multiple file check to ensure 
	that the correct drivers are updated.  When an updated Compaq 
	Fibre Channel Array Controllers SCSI Class driver was included 
	and the Compaq Fibre Channel Host Controllers SCSI driver was 
	unchanged in the new SSD, the Compaq Fibre Channel Array 
	Controllers SCSI Class driver would not be updated.  

Compaq System Management Driver(SYSMGMT.SYS)
	Updated the Compaq System Management driver version from 2.58.02
	to 3.00.01.

	Added support for the Compaq ProLiant 1600 Models 6/350-1 and 
	6/400-1, the Compaq ProLiant 1600R Model 6/400-1, and the 
	Compaq ProLiant 800 Model 6/350-1.

	Modified the behavior of the Automatic Server Recovery (ASR) 
	after the system encounters a Non-Maskable Interrupt (NMI).  
	In this case, ASR will reboot the system after one minute.  
	The ASR timeout value specified through the Compaq System 
	Configuration Utility will not be changed, and ASR behavior 
	is unchanged in all other cases.

	Corrected a problem in which the time of last update timestamp 
	on entries in the Compaq Integrated Management Log was not 
	updated when the entry was updated.  This timestamp is visible 
	through the Compaq Integrated Management Display and through the 
	update time field of the Compaq Integrated Management Log Viewer.

	Corrected a problem on Compaq Professional Workstations in which 
	the Hours in Service value, which is visible through Compaq 
	Insight Manager, was not initialized properly. 

	Corrected the following intermittent problems with the Compaq 
	Hot Plug Redundant Power Supplies on the Compaq ProLiant 1200, 
	the Compaq ProLiant 1600 Model 6/266-1, and the Compaq ProLiant 
	1600R Model 6/266-1: power supply failures were improperly reported 
	as removals and power supply insertions were improperly reported 
	as repairs.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       SRVR.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       SRVR.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.