SOFTPAQ NUMBER:  SP6944
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Support Software for Microsoft Windows NT 3.51
        (Workstations)
VERSION:  1.30 Rev a
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS: Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstation AP400, 5000, 5100, 6000,
                    and 8000

OPERATING SYSTEM:  Microsoft Windows NT 3.51

SYSTEM CONFIGURATION:  N/A

PREREQUISITES: N/A

EFFECTIVE DATE:  28 MAY 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP5964

DESCRIPTION:  This SoftPaq creates two files -- a description file and a
self-extracting executable file.  The self-extracting executable file 
contains Compaq Support Software for Microsoft Windows NT 3.51
that supports the following subsystems and features of 
Compaq Professional Workstations:
 
   Adaptec AIC-78xx PCI SCSI Controller
   Compaq Ethernet or Fast Ethernet Network Interface Controllers
        Compaq Fast Ethernet Embedded NIC NC3121
        Compaq Fast Ethernet NIC NC3120
        Compaq Fast Ethernet NIC NC3121
   Compaq 4/8-GB SLR Tape Driver 
   Compaq HAL Support (ISA, Uniprocessor, and Multiprocessor)
   Compaq Integrated Management Display Utility
   Compaq Netelligent Family of Controllers
   	Compaq Netelligent 10 T/2 PCI UTP/Coax Controller
    	Compaq Netelligent 10 T ISA UTP Controller	
    	Compaq Netelligent 10 T/2 ISA UTP/Coax Controller
    	Compaq Netelligent 10 T PCI UTP Controller
    	Compaq Netelligent 10/100 TX PCI UTP Controller
    	Compaq Netelligent Dual 10/100 TX PCI UTP Controller	
   Compaq NetFlex-3 Network Adapter Family
    	Compaq NetFlex-3/P Controller	
    	Compaq NetFlex-3/E Controller	
   Compaq NetFlex-3 network adapter monitoring, configuration and duplex 
        utility   
   Compaq SCSI Controllers
	Compaq Dual Channel Wide-Ultra SCSI-3 Controller	
        Compaq Wide-Ultra SCSI-3 Controller
        Compaq 32-Bit Fast-Wide SCSI-2/E Controller
      	Compaq 32-Bit Fast-SCSI-2 Controller
    	Integrated 32-Bit Fast-SCSI-2/P Controller	
    	Integrated 32-Bit Fast-Wide SCSI-2/P Controller
    	Integrated Wide-Ultra SCSI Controller
    	Compaq 32-Bit Fast-SCSI-2 Controller option board	
    	Compaq 32-Bit Fast-Wide SCSI-2/P Controller option board
	Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board    	
	Compaq Wide-Ultra SCSI-3 Controller option board      
   Compaq SMART/SMART-2 Family of Array Controllers
	Compaq SMART/IDA-2/IDA/IAES Controllers
	Compaq SMART-2/P and Compaq SMART-2/E Controllers
	Compaq SMART-2DH Controller
	Compaq SMART-2SL Controller 
        Compaq SMART 3100ES Controller  
   Compaq Support Software Installation Utility
   Compaq System Management/Health Driver
   Diamond Multimedia Fire GL 4000 Graphics
   ELSA GLoria-L/GLoria-XL 3D Graphics Controller
   ELSA GLoria-Synergy/Synergy+ 3D Graphics Controller
   ESS AudioDrive Audio Controller
   Matrox MGA Millennium/Millennium II Graphics Controller
   STB Systems MVP Workstation Graphics Controller
   STB Systems MVP Pro 128 Graphics Controller

Enhancements/Fixes:
The release of the Compaq Support Software for Microsoft Windows 
NT 3.51, Version 1.30 A, primarily supports the following new 
products: the Compaq Professional Workstation AP400, the Compaq 
Professional Workstation AP200, the Compaq ProLiant 1850R, the 
Compaq ProLiant 6000 400-512K Model 1-128, the Compaq ProLiant 
6000 400-1024K Model 2S-256, and the Compaq ProLiant 7000 400-1024K 
Model 1S-256.

Adaptec AIC-78xx PCI SCSI Controller
?	Added support for the new Adaptec AIC-78xx PCI SCSI 
        Controller driver, which is only supported on the Compaq 
        Professional Workstation AP200.  For more information on 
        this driver, refer to the section in NTREADME.HLP entitled 
        "Adaptec AIC-78xx PCI SCSI Controller." 

ATI RAGE IIC Graphics Controller
?	Added support for the new ATI RAGE IIC Graphics Controller 
        driver.  The Compaq Professional Workstations and/or Compaq 
        Servers that may use this driver are indicated in the section
        in NTREADME.HLP entitled "Video Support for Compaq Professional
        Workstations and Compaq Servers."

Compaq 4/8-GB SLR Tape Driver
?	Added support for the new Compaq 4/8-GB SLR Tape driver that
        supports the Compaq 4/8-GB SLR Tape Drive.  This driver is 
        an OEM driver from Tandberg Data Inc.  For more information 
        about this new driver, refer to the section in NTREADME.HLP
        entitled "Compaq 4/8-GB SLR Tape Driver Support."

Compaq Netelligent/NetFlex-3 Controller
?	Updated the Compaq Netelligent/NetFlex-3 Controller driver 
	version from 3.24 to 3.26 to support the Compaq ProLiant
	6000 400-512K Model 1-128, the Compaq ProLiant 6000 400-1024K 
	Model 2S-256, and the Compaq ProLiant 7000 400-1024K Model 
	1S-256.

Compaq Ethernet or Fast Ethernet Network Interface Controller Drivers 
?	Added support for the new Compaq Ethernet or Fast Ethernet 
        Network Interface Controller drivers.  For more information 
        on these controllers, refer to the section in NTREADME.HLP
        entitled "Compaq Ethernet or Fast Ethernet Network Interface
        Controllers."

Compaq System Management Driver
?	Updated the Compaq System Management driver version from 
        3.00.01 to 3.06.01.
?	Added support for the following new Compaq servers and 
        workstations:
 	Compaq ProLiant 1850R, Compaq ProLiant 6000 400-512K 
        Model 1-128, Compaq ProLiant 6000 400-1024K Model 2S-256, 
        Compaq ProLiant 7000 400-1024K Model 1S-256, Compaq 
        Professional Workstation AP200, and Compaq Professional 
        Workstation AP400.
?	Corrected a problem on the Compaq ProLiant 800 and the Compaq 
        ProLiant 1600 in which the system would not shut down after 
        the processor fan failed if thermal shutdowns were disabled.  
        This setting can be viewed and set through the Compaq System 
	Configuration Utility as Compaq Automatic Server Recovery 
	(ASR): Thermal shutdown and through the Compaq Insight Manager
        as Recovery: Environment: Degraded action.
?	Corrected a problem on the Compaq ProLiant 800 and the Compaq 
        ProLiant 1600 in which the thermal shutdown setting described 
        above would be set to disabled after a thermal shutdown began.  
        A thermal shutdown is performed after a fan failure or an 
        over-temperature condition.

Diamond Multimedia Fire GL 4000 Graphics Controller
?	Updated the Diamond Multimedia Fire GL 4000 Graphics Controller 
        driver from version 2, 1, 0, 6 to 2, 1, 0, 29.  This updated 
        driver corrects a Softimage problem of the background picture 
        disappearing when zooming into the scene and an ICEM-Surf 
        problem of lower performance when moving the cursor into the 
        window.

ELSA GLoria-Synergy + 3D Graphics Controller
?	Added support for the new ELSA GLoria-Synergy + 3D Graphics 
        Controller's video display driver version 4.32.00.248 for 
        Windows NT 3.51.  This new driver supports both the Synergy 
        PCI and the new Permedia 2A (P2A/P2V) AGP adapter found on 
        the new Compaq Professional Workstation AP400.

STB Systems MVP PRO 128 Graphics Controller
?	Added new support for the STB Systems MVP PRO 128 Graphics 
        Controller driver.  The Compaq Professional Workstations 
        that may use this driver are indicated in the section in
        NTREADME.HLP entitled "Video Support for Compaq Professional
        Workstations and Compaq Servers."

For details, refer to NTREADME.HLP in the created support files.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       WKST.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       WKST.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.