SOFTPAQ NUMBER:  SP6890
PART NUMBER:  N/A    
FILE NAME:  N/A    
TITLE:  Deskpro ATI Rage Video Drivers for Windows NT 4.0
VERSION:  5.03B4 Rev A
LANGUAGE:  English

CATEGORY:  Drivers      

DIVISIONS:  Desktops

PRODUCTS AFFECTED: Compaq Deskpro EN, Deskpro EP, and Deskpro SB models with 
                   one of the ATI Rage Graphics Controllers listed below 
             NOTE: To determine if your model has one of these controllers --
                   In Windows NT, go to the Control Panel, then select 
                   Display, Settings, Display type.

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  ATI Rage Pro Turbo 1x or 2x Graphics Controller
                       ATI Rage IIC Graphics Controller
 
EFFECTIVE DATE:  May 15, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.x

SUPERSEDES:  SP5677

DESCRIPTION:  Unpacks the files needed to install the Windows NT 4.0 video 
driver for one of the ATI Rage Graphics Controllers listed above, which are 
used in certain models of the Deskpro EN, Deskpro EP, and Deskpro SB Series 
(see NOTE above).  Optionally allows an installation diskette to be created.  

Enhancements/Fixes:
 - Fixes the problem where the driver would not install over the VGA driver.
 - Modifies the display properties page to read:  "ATI 3D Accelerator."
 - Other minor fixes

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into a subdirectory named 
Disk_01 that is created under the download directory or the directory 
specified.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. The driver may be installed directly from the files on the download 
directory or a driver diskette can be created.  To create an optional 
driver diskette, run MAKEDISK.BAT.

To install the driver, go to the Control Panel and select:

   Display/Settings/Display Type

Verify that the Adapter Type is one of the ones listed above.
If it is not, then cancel and exit.
If it is, then continue to select:
    
   Change/Have Disk

Type in the path to the download directory or select "Browse" to 
specify the location of the files extracted in step 2.

5. Select OK to install the driver.

6. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies