| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP6826 — Compaq Server Diagnostics
| SoftPaq Number |
SP6826 |
| Filename |
SP6826.EXE |
| Size |
1166K |
| Date |
June 18, 1998 |
| Version |
10.18 Rev A |
| Operating System |
All |
| Products Affected |
All ProSignia, ProLiant, and Systempro Servers. |
| Supersedes |
SP6318 |
Readme
SOFTPAQ NUMBER: SP6826
PART NUMBER: 275884-057
FILE NAME: N/A
TITLE: Compaq Server Diagnostics
VERSION: 10.18 Rev A
LANGUAGE: French
CATEGORY: Systems/Diagnostics-Setup
PRODUCTS AFFECTED:
All ProSignia, ProLiant, and Systempro Servers.
OPERATING SYSTEM: N/A
SYSTEM CONFIGURATION: N/A
EFFECTIVE DATE: June 18, 1998
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 3.1
SUPERSEDES: SP6318
DESCRIPTION:
Unpacks the files needed to create a bootable Compaq Server
Diagnostics diskette, which supports ALL currently shipping Systems Division
server products. It is installed on the Diagnostics Partition for those
systems which support it and have hard drives. It is shipped as a
diskette on all other products.
A Compaq Server Diagnostics diskette contains programs that can perform the
following tasks on Compaq Systems Division server products:
- TEST
- INSPECT (display machine config)
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename
based on the SoftPaq Number above.
2. Execute the downloaded file and follow the on-screen instructions.
Entering "Y" to confirm the unpacking of files creates a new directory
folder in the download directory. All files are unpacked into this
newly created directory.
3. To create the Diagnostics diskette, run MAKEDISK.BAT and
follow on-screen instructions.
4. After the Diagnostic diskette has been created, you may delete the
self-extracting file downloaded in step 1, as well as the directory
folder and files created in step 2.
5. Shut down and power off the computer.
6. Place the newly created Diagnostics diskette in Drive A:, and
power up the computer, allowing the computer to boot from the diskettte.
7. To install or upgrade Personal Computer Diagnostics on the Diagnostics
Partition, select "Create" or "Update" partition from the "Manage Diagnostics
Partition" menu, and follow the prompts. Or select the option to run
PC Diagnostics from the diskette.
Copyright 1998, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|