PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP6823

SP6823 — Compaq Server Diagnostics

SoftPaq Number SP6823
Filename SP6823.EXE
Size 1160K
Date June 18, 1998
Version 10.18 Rev A
Operating System All
Products Affected All ProSignia, ProLiant, and Systempro Servers.
Supersedes SP6315

  Download SP6823.EXE  


Readme

SOFTPAQ NUMBER:  SP6823
PART NUMBER:  275884-007
FILE NAME:  N/A
TITLE:  Compaq Server Diagnostics 
VERSION:  10.18 Rev A
LANGUAGE:  US English

CATEGORY:  Systems/Diagnostics-Setup

PRODUCTS AFFECTED:
All ProSignia, ProLiant, and Systempro Servers.

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  June 18, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  SP6315

DESCRIPTION:
Unpacks the files needed to create a bootable Compaq Server
Diagnostics diskette, which supports ALL currently shipping Systems Division  
server products.  It is installed on the Diagnostics Partition for those
systems which support it and have hard drives.  It is shipped as a
diskette on all other products.
A Compaq Server Diagnostics diskette contains programs that can perform the 
following tasks on Compaq Systems Division server products:
 - TEST 
 - INSPECT (display machine config) 


HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. To create the Diagnostics diskette, run MAKEDISK.BAT and 
follow on-screen instructions.

4. After the Diagnostic diskette has been created, you may delete the  
self-extracting file downloaded in step 1, as well as the directory
folder and files created in step 2.

5. Shut down and power off the computer.

6. Place the newly created Diagnostics diskette in Drive A:, and 
power up the computer, allowing the computer to boot from the diskettte.

7. To install or upgrade Personal Computer Diagnostics on the Diagnostics 
Partition, select "Create" or "Update" partition from the "Manage Diagnostics 
Partition" menu, and follow the prompts.  Or select the option to run 
PC Diagnostics from the diskette.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies



PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home