SOFTPAQ NUMBER: SP6763
PART NUMBER:  277068-003
FILE NAME:  N/A
TITLE:  Compaq Support Software for Microsoft Windows NT 4.0
VERSION: 2.08 Rev a
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS: Systems
	   Workstations

PRODUCTS AFFECTED:  All Systems Products and 
		    Professional Workstations

OPERATING SYSTEM:  Microsoft Windows NT Version 4.0

SYSTEM CONFIGURATION:  N/A

PREREQUISITES: N/A

EFFECTIVE DATE:  30 JUNE 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.0

SUPERSEDES:  SP6750

DESCRIPTION:  This SoftPaq creates the Compaq Support Software (SSD) for the
Microsoft Windows NT 4.0 diskettes.  There are a total of nine
diskettes with this release. The SSD supports the following subsystems
and features of Compaq Systems products and Professional Workstations:

   Compaq Cluster Verification Utility
   Compaq Fibre Channel Storage System
   Compaq Fibre Channel Filter Driver
   Compaq Integrated Management Display Utility
   Compaq Integrated Management Log Viewer
   Compaq Online Storage Controller Recovery Utility   
   Compaq PCI Hot Plug Utility
   Compaq Power Down Manager
   Compaq Power Supply Viewer
   Compaq ProLiant Storage System 
   Compaq Recovery Server, Standby Agent with SMART-2 Support
   Compaq Recovery Server, Online Agent with SMART-2 Support
   Compaq Remote Insight Board Driver
   Compaq Remote Insight Board WAN Driver
   Compaq Remote Monitor Service
   Compaq Support Software Installation Utility
   Compaq System Management/Health Driver   
   Netelligent Family of Controllers
	Compaq Netelligent 10 T/2 PCI UTP/Coax Controller
	Compaq Netelligent 10 T ISA UTP Controller      
	Compaq Netelligent 10 T/2 ISA UTP/Coax Controller
	Compaq Netelligent 10 T PCI UTP Controller
	Compaq Netelligent 10/100 TX PCI UTP Controller
	Compaq Netelligent Dual 10/100 TX PCI UTP Controller    
   NetFlex-3 Network Adapter Family
	Compaq NetFlex-3/P Controller   
	Compaq NetFlex-3/E Controller   
   NetFlex-3 network adapter monitoring, configuration and duplex utility
   Compaq 10/100 TX Embedded Intel WOL UTP Controller
   Compaq 10/100 TX PCI Intel UTP Controller
   SMART Family of Array Controllers
	Compaq SMART/IDA-2/IDA/IAES Controllers
	Compaq SMART-2/P and Compaq SMART-2/E Controllers
	Compaq SMART-2DH Controller
	Compaq SMART-2SL Controller
   Compaq SCSI Controllers
	Compaq Dual Channel Wide-Ultra SCSI-3 Controller        
	Compaq Wide-Ultra SCSI-3 Controller
	Compaq 32-Bit Fast-Wide SCSI-2/E Controller
	Compaq 32-Bit Fast-SCSI-2 Controller
	Integrated 32-Bit Fast-SCSI-2/P Controller      
	Integrated 32-Bit Fast-Wide SCSI-2/P Controller
	Integrated Wide-Ultra SCSI Controller
	Compaq 32-Bit Fast-SCSI-2 Controller option board       
	Compaq 32-Bit Fast-Wide SCSI-2/P Controller option board
	Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board        
	Compaq Wide-Ultra SCSI-3 Controller option board   
   Diamond Multimedia Fire GL 4000 Graphics Controller
   ELSA Gloria-L 3D Graphics Controller
   ELSA Gloria-Synergy 3D Graphics Controller
   ELSA Gloria-Synergy+ 3D Graphics Controller
   ELSA Gloria-XL 3D Graphics Controller
   ESS AudioDrive Audio Controller
   Matrox Millennium/Millennium II Graphics Controller
   STB Systems MVP Workstation Graphics Controller
   STB Systems MVP Pro 128 Graphics Controller
   ATI RAGE IIC Graphics Controller

The following diskettes can be created using the files that 
result when the SoftPaq is unbundled:

	Disk 1 - Compaq Support Software for Microsoft NT 4.0
		 Disk #1
	Disk 2 - Compaq Support Software for Microsoft NT 4.0
		 Disk #2
	Disk 3 - Diamond Multimedia Fire GL 4000 Video Accelerator,
		 Matrox MGA Millennium Video Drivers, and ESS 1868 Audio
		 Drivers for Microsoft Windows NT 4.0
	Disk 4 - ELSA Gloria-L Video Drivers and STB Systems MVD Workstation
		 Display Controller for Microsoft Windows NT 4.0
	Disk 5 - Compaq Support Software for Microsoft NT 4.0
		 Utilities Disk
	Disk 6 - ELSA GLoria-Synergy/Synergy II Video Drivers for
		 Microsoft NT 4.0
	Disk 7 - ELSA GLoria-XL Video Drivers for Microsoft NT 4.0
	Disk 8 - Compaq Ethernet or Fast Ethernet NIC Drivers for
		 Microsoft NT 4.0
	Disk 9 - STB Systems MVP Pro 128 Video Drivers for Microsoft
		 NT 4.0

Enhancements/Fixes:

The release of the Compaq Support Software for Microsoft Windows NT
4.0, Version 2.08 Revision A, primarily supports the following new 
products: the Compaq ProLiant 1850R, the Compaq ProLiant 6000 400-512K
Model 1-128, the Compaq ProLiant 6000 400-1024K Model 2S-256, the 
Compaq ProLiant 7000 400-1024K Model 1S-256, and the Compaq 
Professional Workstation AP200.  

Adaptec AIC-78xx PCI SCSI Controller(AIC78XX.SYS)
?	Added support for the new Adaptec AIC-78xx PCI SCSI Controller
        driver, which is only supported on the Compaq Professional 
	Workstation AP200.  For more information on this driver, refer
	to the section entitled Adaptec AIC-78xx PCI SCSI Controller. 

ATI RAGE IIC Graphics Controller(ATI.SYS)
?	Added support for the new ATI RAGE IIC Graphics Controller 
	driver.  The Compaq Professional Workstations and/or Compaq 
	Servers that may use this driver are indicated in the section 
	entitled Video Support for Compaq Professional Workstations 
	and Compaq Servers.

Compaq Array Configuration Utility(CPQACU.EXE)
?	Added support for the Compaq Array Configuration Utility 
	version 2.00, which is supported only in Windows NT 4.0.  
	Previous versions of this utility are not supported in this 
	release.  For more information about the new features and 
	restrictions of this utility, refer to the section entitled 
	Compaq Array Configuration Utility Support. 

Compaq ATAPI/IDE Controller(CPQATAPI.SYS)
?	Added support for the new Compaq ATAPI/IDE Controller driver 
	version 2.21.1, which is only supported on the Compaq 
	Professional Workstation AP200.  For more information about 
	this driver, refer to the section entitled Compaq ATAPI/IDE 
	Controller.

Compaq Ethernet or Fast Ethernet Network Interface Controller Drivers
        (N100NT.SYS)
?	Added support for Compaq Fast Ethernet NIC NC3120.  For more 
        information on this controller, refer to the section entitled 
	Compaq Ethernet or Fast Ethernet Network Interface Controllers.

Compaq Netelligent/NetFlex-3 Controller(NETFLX3.SYS)
?	Updated the Compaq Netelligent/NetFlex-3 Controller driver 
	from Version 4.25 to 4.26 to support the Compaq ProLiant 6000 
	400-512K Model 1-128, the Compaq ProLiant 6000 400-1024K 
	Model 2S-256, and the Compaq ProLiant 7000 400-1024K Model 
	1S-256.

Compaq Remote Insight Board/PCI(CPQRIB.SYS)
?	Added support for the new Compaq Remote Insight Board/PCI 
	driver version 1.5.  This driver supports both the Compaq 
	Remote Insight Board/PCI and the Compaq Remote Insight Board.  
	For more information about this driver, refer to the section
	entitled Compaq Remote Insight Board/PCI. 

Compaq SMART/SMART-2 Array Controller(CPQARRAY.SYS)
?	Added support for the Compaq SMART Array 3100ES Controller.  
	The Compaq SMART Array 3100ES Controller is a four-channel 
	Wide-Ultra SCSI-3 Drive Array Controller with 32-bit PCI 
	system interface and I2O support for high-end servers. 
?	Corrected a problem with the Compaq Online Storage Controller 
	Recovery Utility incorrectly indicating a cable check status 
	on one of the Compaq SMART-2 Array Controllers configured as 
	part of a dual channel controller pair.

Compaq System Management Driver(SYSMGMT.SYS)
?	Updated the Compaq System Management driver version from 
	3.03.01 to 3.06.01.
?	Added support for the following new Compaq servers and 
	workstation:  
	Compaq ProLiant 1850R, Compaq ProLiant 6000 400-512K Model 
	1-128, Compaq ProLiant 6000 400-1024K Model 2S-256, Compaq 
	ProLiant 7000 400-1024K Model 1S-256, and Compaq Professional 
	Workstation AP200.
?	Added support for logging Non-Maskable Interrupt (NMI) and 
	Windows	NT bugcheck data to the Windows NT Event Viewer.
?	Corrected a problem on the Compaq ProLiant 800 and the Compaq
	ProLiant 1600 in which the system would not shut down after 
	the processor fan failed if thermal shutdowns were disabled.  
	This setting can be viewed and set through the Compaq System 
	Configuration Utility as Compaq	Automatic Server Recovery (ASR): 
	Thermal shutdown and through the Compaq Insight Manager as 
	Recovery: Environment: Degraded action.
?	Corrected a problem on the Compaq ProLiant 800 and the Compaq 
	ProLiant 1600 in which the thermal shutdown setting described 
	above would be set to disabled after a thermal shutdown began.   
	A thermal shutdown is performed after a fan failure or an 
	over-temperature condition.



For details, refer to NTREADME.HLP located on diskette #1


HOW TO USE:

1.  Obtain nine formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change
    to that directory.  The file that is downloaded is SP6763.EXE.

3.  From that drive and directory, execute the downloaded SoftPaq file:
      SP6763 [ENTER]
    and follow the on-screen instructions. The following files will be
    created:
       QRST5.EXE
       277068US._01
       277068US._02
       277068US._03
       277068US._04
       277068US._05
       277068US._06
       277068US._07
       277068US._08
       277068US._09
       277068US.DOC

4.  Please read 277068US.DOC for instructions on using QRST5 to create
    the diskettes and for the steps to install the software.

5.  After the disks are created, you may delete the downloaded file
    SP6763.EXE and the other files it created from your hard drive if you
    wish.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies