SOFTPAQ NUMBER:  SP6533
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Deskpro Specific Models Power Management Extensions for Windows 95 and NT
VERSION:  2.50 Rev E
LANGUAGE:  Italian

CATEGORY:  Drivers

DIVISIONS:  Desktops

PRODUCTS AFFECTED:  
Deskpro 4000  models running Windows NT:       6333, 6300MMX, 6266MMX, 6233MMX, 
                                               5233MMX, 5200MMX, 5166MMX
Deskpro 4000S models running Windows NT:       5233MMX, 5200MMX, 5166MMX
Deskpro 4000N models running Windows NT:       5233MMX, 5200MMX, 5166MMX
Deskpro 6000  models running Windows 95 or NT: 6333, 6300MMX, 6266X, 6266MMX, 6233X, 
                                               6233MMX
Deskpro EP Series, Deskpro SB Series and Deskpro EN Series running Windows NT 4.0

OPERATING SYSTEM:  Microsoft Windows 95, 
                   Microsoft Windows NT 3.51 and 4.0

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  25 May 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES: SP4098

DESCRIPTION:  Unpacks the files needed to install Compaq Power
Management Extensions for the specific Deskpro models mentioned above. 
These extensions provide support for power conservation features,
such as the hard drive spinning down when it is not being used.

Enhancements/Fixes:
 - Adds support for new Deskpro EP, EN, and SB Series models
 - Corrected "Check Sum error" due to driver version change
 - Corrected blue screen error after running shut down

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

To create the optional installation diskette, run MAKEDISK.BAT and
follow on-screen instructions.

3. To install, run SETUP.EXE.  For example, enter:

   <path>\setup
   where <path> is the drive and directory path created in step 2
                      - or -
                   a diskette drive letter if using the optional 
                   installation diskettes 

   Follow the on-screen instructions.

4. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

Copyright 1998 Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies